Ryobi P711 Operator'S Manual Download Page 13

13

MAINTENANCE

PRESS RELEASE BUTTON

PULL DUST BOWL 

DOWN AND OUT 

TO REMOVE

Fig. 7

CLEANING THE HAND VAC

See Figures 7 - 9.

The dust bowl should be checked, emptied, and cleaned 
periodically to obtain maximum dust collection.

REMOVING THE DUST BOWL

See Figure 7.

 

�Remove the battery pack from the vacuum.

 

Depress the release button located on top of the hand vac. 
Pull the dust bowl down and out as shown to separate it 
from the motor housing.

REMOVING AND CLEANING THE FILTER

See Figure 8.

When purchasing replacement filter, request recommended 
part number 300040018.

 

�Remove the battery pack from the vacuum.

 

Remove the filter by pulling it out of the dust bowl. 

 

Shake or lightly brush any dust or dirt off the filter.

 

Empty  the  dust  bowl;  wash  if  necessary.  Before 
reattaching  to  the  hand  vac,  make  sure  all  pieces  are 
completely dry.

REATTACHING THE DUST BOWL

See Figure 9.

 

Position the two sections as shown. Align slots on bottom 
of dust bowl with tabs on bottom of motor housing then 
snap the two sections together.

BATTERIES

The battery pack for this product is equipped with nickel-
cadmium rechargeable batteries. Length of service from each 
charging will depend on the type of work you are doing.
The batteries in this product have been designed to provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. 

Do not 

disassemble battery pack 

and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

DUST BOWL

HAND VAC

BATTERY PACK

FILTER 

Fig. 8

Fig. 9

SLOTS

TABS

Summary of Contents for P711















Reviews: