11 — English
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-860-4050.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spray pattern is like a sprayer
rather than a fog.
Unit is tilted too far forward.
Unit is being shaken or moved
too fast.
Unit must be kept level during use.
Allow the unit to remain still until the liquid inside settles
and normal fogging resumes, then move slowly and do
not shake the unit during use.
Unit will not spray or sprays
improperly.
Tank is overfilled.
Reduce the amount of liquid in the tank. The tank should
not be filled beyond the max fill line.
Tank pressure is not building.
O-ring in cap needs to be
replaced.
Call customer service to order a replacement o-ring,
then replace o-ring in cap.
Unit is “spitting” after trigger is
released.
Liquid in tank is too thick.
Empty the tank, clean both the tank and filter, then try
again. Make sure that all chemicals/liquid used in the
fogger are as thin as water.
Spray is weak.
Filter needs to be cleaned.
Solution is too thick.
Clean filter as described in
Cleaning the Unit
.
Make sure that all chemicals/liquid used in the fogger
are as thin as water.
Unit runs for a short period
then shuts off.
Battery needs charging.
Solution is too thick.
Recharge the battery.
Make sure that all chemicals/liquid used in the fogger
are as thin as water.
Summary of Contents for P2805
Page 3: ...iii Fig 5 Fig 6 ...
