Ryobi P237, Operator'S Manual

Page: 5 / 24

5 — English
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
OPERATION
APPLICATIONS
You ma y use this product for the purposes listed below:

Driving long deck screws, driving carriage bolts into deck
posts; driving Tapcon
®
screws into block walls and con-
crete; driving screws into metal studs
For complete charging instructions, see the operator’s
manuals for your battery pack and charger.
VARIABLE SPEED SWITCH TRIGGER
See Figure 1, page 8.
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
To turn the tool
ON , depress the switch trigger. To turn it
OFF , release the switch trigger and allow the tool to come
to a complete stop.
NOTE:
A whistling or ringing noise coming from the switch
during use is a normal part of the switch function.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
See Figure 1, page 8.
Set the direction of rotation selector in the OFF (center lock)
position to lock the switch trigger and help prevent accidental
starting when not in use.
Position the direction of rotation selector to the left of the
switch trigger for forward operation. Position the selector to
the right of the switch trigger to reverse the direction.
NOTE: The tool will not run unless the direction of rotation
selector is pushed fully to the left or right.
FEATURES
PRODUCT SPECIFICATIONS
Coupler/Chuck .......................................................... 1/4 in. Impacts Per Minute ............................................. 3,400 IPM
SPEED/TORQUE
1 - LOW .............................................................................................................. 0-1,700 RPM/400 in.lb
2 - MEDIUM ..................................................................................................... 0-2,500 RPM/1,100 in.lb
3 - HIGH........................................................................................................... 0-3,200 RPM/1,800 in.lb