background image

3 — English

GENERAL POWER TOOL SAFETY WARNINGS

 

Keep cutting tools sharp and clean. Properly maintained 
cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

 

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed. Use of the power tool for operations different 

from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 

manufacturer.  A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

 

Use power tools only with specifically designated 

battery packs. Use of any other battery packs may create 

a risk of injury and fire.

 

When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. Shorting the 

battery terminals together may cause burns or a fire.

 

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help. Liquid ejected from the 

battery may cause irritation or burns.

SERVICE

 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 
This will 
ensure that the safety of the power tool is maintained.

 

When servicing a power tool, use only identical 
replacement parts. Follow instructions in the 
Maintenance section of this manual.
 Use of unauthorized 
parts or failure to follow Maintenance instructions may 
create a risk of shock or injury.

 

Hold power tool by insulated gripping surfaces, when 
performing an operation where the cutting accessory 
may contact hidden wiring. 
Cutting accessory 
contacting a  “live”  wire may make exposed metal parts 
of the power tool  “live” and could give the operator an 
electric shock. 

 

Wear ear protectors when impact drilling. Exposure 
to noise can cause hearing loss. 

 

Use auxiliary handle(s), if supplied with the tool. Loss 
of control can cause personal injury. 

 

Know your power tool. Read operator’s manual 
carefully. Learn its applications and limitations, as 
well as the specific potential hazards related to this 
power tool. 
Following this rule will reduce the risk of 
electric shock, fire, or serious injury.

 

Always wear eye protection with side shields marked 

to comply with ANSI Z87.1 when assembling parts, 

operating the tool, or performing maintenance. 

Following this rule will reduce the risk of serious personal 
injury.

 

Protect your lungs. Wear a face or dust mask if the 
operation is dusty. 
Following this rule will reduce the 
risk of serious personal injury.

 

Protect your hearing. Wear hearing protection during 
extended periods of operation.
 Following this rule will 
reduce the risk of serious personal injury.

 

Battery tools do not have to be plugged into an 
electrical outlet; therefore, they are always in 
operating condition. Be aware of possible hazards 
when not using your battery tool or when changing 
accessories. 
Following this rule will reduce the risk of 
electric shock, fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 
or heat. 
This will reduce the risk of explosion and possibly 
injury.

  

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 
A damaged battery is subject 
to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

Batteries can explode in the presence of a source 
of ignition, such as a pilot light. 
To reduce the risk of 
serious personal injury, never use any cordless product 
in the presence of open flame. An exploded battery can 
propel debris and chemicals. If exposed, flush with water 
immediately.

 

Do not charge battery tool in a damp or wet location. 
Following this rule will reduce the risk of electric shock.

 

For best results, your battery tool should be charged 
in a location where the temperature is more than 
50°F but less than 100°F. 
To reduce the risk of serious 
personal injury, do not store outside or in vehicles.

 

Under extreme usage or temperature conditions, 
battery leakage may occur. If liquid comes in contact 
with your skin, wash immediately with soap and water. 
If liquid gets into your eyes, flush them with clean 
water for at least 10 minutes, then seek immediate 
medical attention. 
Following this rule will reduce the risk 
of serious personal injury.

  

Save these instructions. Refer to them frequently and 
use them to instruct others who may use this tool. If you 
loan someone this tool, loan them these instructions also.

IMPACT DRIVER SAFETY WARNINGS

Summary of Contents for P214





















Reviews: