background image

OPERATOR’S MANUAL

MANUEL D’UTILISATION
MANUAL DEL OPERADOR

COMPACT 18 VOLT HAMMER DRILL

PERCEUSE À PERCUSSION  

COMPACTE DE 18 V
TALADRO DE PERCUSIÓN  

COMPACTO DE 18 V

P213

WARNING: 

To reduce the 

risk of injury, the user must read and 

understand the operator’s manual 

before using this product.

SAVE THIS MANUAL FOR 

FUTURE REFERENCE

ADVERTENCIA:

 

Para reducir 

el riesgo de lesiones, el usuario debe leer 
y comprender el manual del operador 
antes de usar este producto. 

AVERTISSEMENT : 

Pour 

réduire les risques de blessures, 

l’utilisateur doit lire et veiller à bien 

comprendre le manuel d’utilisation avant 

d’employer ce produit.  

GUARDE ESTE MANUAL 

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL 

POUR FUTURE RÉFÉRENCE

INCLUDES: Hammer Drill, Auxiliary Handle 
Assembly, Operator’s Manual

TABLE OF CONTENTS

****************

 General Power Tool Safety Warnings

  

 ........................................................2-3

 Drill-Driver Safety Warnings ...............3

 

Symbols ..............................................4



 Assembly ............................................5



 Features ..............................................5

 Operation .........................................6-9

 Maintenance .......................................9

 Illustrations .......................................10

 Parts Ordering and Service

  

 ............................................Back page

INCLUT : Perceuses à percussion, poignée 

auxiliaire, manual del utilisation

TABLE DES MATIÈRES

****************

 Règles de sécurité générales relatives 

aux outils électriques ......................2-3

 Avertissements de sécurité relatifs 

perceuses à percussion .....................3

 

Symboles ............................................4



 Assemblage ........................................5



 Caractéristiques .................................5

 Utilisation  ........................................6-9

 Entretien .............................................9

 Illustrations .......................................10

 Commande de pièces et dépannage

  

 ......................................... Page arrière

INCLUYE: Taladros de impacto, mango 
auxiliar, manual del operador

ÍNDICE DE CONTENIDO

****************

  Advertencias de seguridad para

  herramientas eléctrica ................... 2-3

  Advertencias de seguridad de  

taladros de impacto ...........................3



 

Símbolos ............................................4



 Armado ..............................................5



  Características ...................................5

 Funcionamiento ............................. 6-9

 Mantenimiento ...................................9

 Illustraciones ....................................10



  Pedidos de piezas y servicio

   ......................................Pág. posterior

Summary of Contents for P213














Reviews: