Ryobi OSF1835BL, Original Instructions Manual

Page: 9 / 28

2
3
3
1
2
1
1
1
2
2
3 4
1
1
2
2
3
3
1
2
2
+
A
/
B
A
B
5 6
2
1
1
2
3
9 10 11
Secure the middle tubes to the scarifier housing using the
tightening knobs. Rotate the knobs clockwise to tighten.
Insert the lower handle onto the middle tubes. Align the
holes and insert the screws. Secure the lower handle
assembly by rotating the knobs clockwise.
Insert the upper handle onto the lower handle assembly. Align the holes and insert the screws. Secure the upper handle
assembly to the lower handle assembly by rotating the knobs clockwise.
Use zip ties to secure the wiring along one side of the
scarifier.
NOTE: Make sure that the wiring is properly secured to one
side of the scarifier.
Open the battery cover. Install two 18V battery packs. Insert the isolation key. Close the battery cover. Press the lock switch then squeeze the triggers.
NOTE: Squeezing either trigger activates the product.
NOTE: Pressing the triggers activates the product. NOTE: Releasing the triggers stops the product.
8
GETTING STARTED GETTING STARTED GETTING STARTED