Ryobi OSF1835BL, Original Instructions Manual

Page: 26 / 28

PRODUCT SPECIFICATIONS
Cordless Scarifier
Model OSF1835BL
Rated voltage DC 18V x 2 (36V)
Working width 350 mm
Working depths -12mm, -8mm, -4mm, 2mm
No-load blade speed 3300/min
Weight
Bare tool 8.5 kgs
Frame and debris catcher 1.18 kgs
Blade 0.65 kgs
Noise emission level (in accordance with EN 50636-2-92 Annex
DD)
L
pA
80.5 dB(A)
Uncertainty K = 3.0 dB
L
wA
92 dB(A)
Uncertainty K = 3.8 dB
Vibration level (in accordance with EN 50636-2-92 Annex CC)
a
h
8.1 m/s
2
Uncertainty
K
= 1.5 m/s
2
BATTERY AND CHARGER
Model OSF1835BL
Compatible
battery packs
RB18L13, RB18L26, RB18L15, RB18L15A,
RB18L15B, RB18L20, RB18L20A, RB18L25,
RB18L25A, RB18L30, RB18L30A, RB18L40,
RB18L40A, RB18L50, RB18L50A, RB18L60,
RB18L60A, RB18L90, RB18L90A
Compatible
chargers
BCL14181H, BCL14183H, BCS618, RC18627,
RC18627UV, RC18150, RC18150U, RC18120,
RC18115, RC18118C, BCL14181V
NOTE: It is recommended to use two 4.0 Ah, 5.0 Ah, 6.0
Ah, or 9.0 Ah battery packs for best performance and
runtime. Two battery packs of the same capacity must be
installed when operating the product.
REPLACEMENT PARTS
Scarifier drum 099228001044
Debris Catcher 099228001064
NOTE: Visit your local special orders desk or contact
RYOBI Customer Service for replacement parts.
WARNING! The declared vibration total values
and the declared noise emission values given in this
instruction manual have been measured in accordance
with a standardised test and may be used to compare
one tool with another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission values
represent the main applications of the tool. However, if the
tool is used for different applications, used with different
accessories, or poorly maintained, the vibration and noise
emission may differ. These conditions may significantly
increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and
noise should take into account the times when the tool
is turned off or when it is running idle. These conditions
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.