background image

2 — English

 

Always wear eye protection with side shields marked 

to comply with ANSI Z87.1. 

Failure to do so could result 

in objects being thrown into your eyes resulting in possible 

serious injury.

 

An extension cord should not be used unless  absolutely 

necessary. 

Use of improper extension cord could result 

in a risk of fire and electric shock. If extension cord must 

be used, make sure:

  a.  That pins on plug of extension cord are the same  
     number, size and shape as those of plug on charger.
  b.  That extension cord is properly wired and in good   

   electrical condition; and

  c.  That wire size is large enough for AC ampere rating  

   of charger as specified below:

 

 

     Cord Length (Feet)  

25' 

50' 

100'

       Cord Size (AWG)   

16 

16 

16

 

     

NOTE:

 AWG = American Wire Gauge

 

Do not operate charger with a damaged cord or plug, 

which could cause shorting and electric shock. If damaged, 

have the charger replaced by an authorized serviceman.

 

Do not operate charger if it has received a sharp blow, 

been dropped, or otherwise damaged in any way. 

Take it to an authorized serviceman for electrical check to 

determine if the charger is in good working order. 

 

Do not disassemble charger. 

Take it to an authorized 

serviceman when service or repair is required. Incorrect 

reassembly may result in a risk of electric shock or fire.

  Unplug charger from outlet before attempting any 

maintenance or cleaning to reduce the risk of electric 

shock.

 

Disconnect charger from the power supply when not in 

use. 

This will reduce the risk of electric shock or damage 

to the charger if metal items should fall into the opening. 

It also will help prevent damage to the charger during a 

power surge.

 

Risk of electric shock. 

Do not touch uninsulated portion 

of output connector or uninsulated battery terminal.

 

 Do not charge battery in a damp or wet location. Do 

not use, store, or charge battery packs or products in 

locations where the temperature is less than 50°F or 

more than 100°F. 

Do not store outside or in vehicles.

 

Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this tool. If you 

loan someone this tool, loan them these instructions also 

to prevent misuse of the product and possible injury.

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. 

Failure 

to follow all instructions listed below, may result in electric 

shock, fire and/or serious personal injury.

 

Before using charger,

 read all instructions and cautionary 

markings in this manual, on charger, battery, and product 

using battery to prevent misuse of the products and pos-

sible injury or damage.

WARNING: 

Charge only rechargeable lithium-ion batteries. Other types 

of batteries may burst, causing personal injury or damage. 

For compatible battery packs see tool/appliance/battery 

pack/charger correlation supplement 988000-842.

 

Do not use charger outdoors or expose to wet or damp 

conditions. 

Water entering charger will increase the risk 

of electric shock.

WARNING: 

Do not charge a battery that is wet or has been wet or 

exposed to liquids.

 

Use of an attachment not recommended or sold by the 

battery charger manufacturer may result in a risk of 

fire, electric shock, or injury to persons. 

Following this 

rule will reduce the risk of electric shock, fire, or serious 

personal injury. 

 

Do not abuse cord or charger. 

Never use the cord to carry 

the charger. Do not pull the charger cord rather than the 

plug when disconnecting from receptacle. Damage to the 

cord or charger could occur and create an electric shock 

hazard. If cord or charger is damaged, have the charger 

replaced by an authorized serviceman.

 

Make sure cord is located so that it will not be stepped 

on, tripped over, come in contact with sharp edges or 

moving parts or otherwise subjected to damage or 

stress. 

This will reduce the risk of accidental falls, which 

could cause injury, and damage to the cord, which could 

result in electric shock.

 

Keep cord and charger from heat to prevent damage 

to housing or internal parts.

 

Do not let gasoline, oils, petroleum-based products, 

etc. come in contact with plastic parts. 

They contain 

chemicals that can damage, weaken, or destroy plastic.

IMPORTANT SAFETY INSTRUCTIONS

1.  SAVE THESE INSTRUCTIONS - DANGER: TO REDUCE RISK OF FIRE 

OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS. 

This manual contains important safety and operating instructions for battery charger OP406.

2. 

Before using battery charger,

 read all instructions and cautionary markings on battery charger, battery, and product 

using battery.

3.

 

CAUTION:

 

To reduce the risk of injury, charge only lithium-ion rechargeable batteries. Other types of batteries 

may burst, causing personal injury or damage.

SAFETY RULES FOR CHARGER

Summary of Contents for OP406

















Reviews: