Safety
7
WARNING
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
OPERATION
WARNING
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
WARNING
Keep water and mist discharge pointed away from all
electrical devices to reduce the risk of electrocution or
electric shock.
WARNING
Ensure all hose connections are secure before using
misting fan. Spilled water and leaks can result in a
slippery surface and create a slip and fall hazard.
WARNING
Do not use this product to spray pesticides, liquid
fertilizers, chemicals, or any liquids other than clean
water. Spraying these substances could result in serious
injury or illness to the operator or bystanders.
NOTICE:
This product is designed to be powered by a Ryobi One+
18V battery pack only.
FAN LOW/OFF/HIGH SWITCH
See figure 2.
The LOW/OFF/HIGH fan switch is located on the left front
of the base.
■ To select LOW speed, press ( I ).
■ To select HIGH speed, press ( II ).
■ To turn the fan OFF, select the center position ( O ).
PUMP ON/OFF SWITCH
See Figure 2.
The LOW/OFF/HIGH pump switch is located on the right
front of the base.
■ To select LOW speed, press ( I ).
■ To select HIGH speed, press ( II ).
■ To turn the pump OFF, select the center position ( O ).
INSTALLING/REMOVING BATTERY PACK
See Figure 3.
■ Set both switches to the OFF ( O ) position.
■ Press the tab to open the battery compartment latch.
■ Place the battery pack in the tool. Align the raised rib
on the battery pack with the groove in the fan’s battery
port.
■ Make sure the latches on the battery pack snap in
place and the battery pack is secured in the portable
fan before operation begins.
■ Depress the latches to remove the battery pack.
■ Close the battery compartment cover and press until
it snaps shut.
WARNING
Always remove battery pack from your product when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
ADJUSTING THE MISTING ANGLE
See Figure 4.
The fan can be angled forward -15° or back 45° to adjust
the direction of the mist.
USING THE MISTING FAN WITH A WATER BUCKET
(NOT INCLUDED)
See Figure 5 - 6.
