8
English
GB
F
D
E
I
P
NL
S
DK
N
FIN GR
HU
CZ
RU
RO
PL SLO HR
TR EST
LT
LV
SK
BG
GB
F
D
E
I
P
NL
S
DK
N
FIN GR
HU
CZ
RU
RO
PL SLO HR
TR EST
LT
LV
SK
BG
FEATURES
PRODUCT SPECIFICATIONS
Motor 18
V
Charge Rate
1 – 1
1/2
Hour
Weight
3 lbs. (767 g)
Blade Width
4 in. (102 mm)
Battery pack (not included)
BPP-181 M / BPP-1815M /
ACR-1800
Charger (not included)
BC-1800 / BC-1815S /
ABP-1801
FEATURES
1. Rear
handle
2. Trigger lock button
3. Trigger
4. Blades
5. Blade
cover
6. Battery
port
7. Latches
8. Battery pack (not included)
9. Blade
screws
10. Blade slot
11. Gear post
OPERATION
TO INSTALL BATTERY PACK
■
Place the battery pack in the grass shear. Align raised
rib on battery pack with groove in grass shear
battery port.
See Figure 2.
■
Make sure the latches on each side of the battery
pack snap in place and that battery pack is secured in
the grass shear before beginning operation.
TO REMOVE BATTERY PACK
■
Locate latches on side of battery pack and depress
both sides to release the battery pack from the grass
shear.
See Figure 2.
■
Remove battery pack from the grass shear.
CAUTION
When placing battery pack in your grass shear,
be sure raised rib on battery pack aligns with
groove in grass shear battery port and latches
snap in place properly. Improper assembly of
battery pack can cause damage to internal
components.
STARTING THE GRASS SHEAR
■
Press and hold the trigger lock button.
See Figure 3.
This makes the trigger operational.
■
Release the trigger lock button and continue to
squeeze the trigger for extended operation.
STOPPING THE GRASS SHEAR
■
Release the trigger to stop the grass shear.
■
Upon release of the trigger, the trigger lock button will
be automatically reset to the lock position.
HOLDING THE GRASS SHEAR
WARNING
Dress properly to reduce the risk of injury when
operating this unit. Do not wear loose clothing or
jewelry. Always wear eye protection when in use.
Wear heavy, long pants, boots and well fitting
gloves. Do not wear short pants, sandals or
go barefoot.
■
Hold the unit by the rear handle with the blade
directed away from you.
See Figure 4.
USING THE GRASS SHEAR
Use the grass shear for decorative trimming of grass
around trees, walkways, flower beds, etc.
■
With the blade parallel to the ground, start unit and
trim grass in a forward motion.
See Figure 4.
OPERATING TIPS
■
Before starting your grass shear, hold the unit
with the cutting blades directed away from you.
Always use your grass shear properly.
■
Keep from trimming too close to dirt, sand or gravel.
This can cause the blades to dull, reducing the
cutting efficiency.
■
Do not force the unit through dense growth.
If the blades slow down, reduce your pace.
■
If blades do become jammed, stop the motor,
allow the blades to stop and remove the battery pack
before attempting to remove the obstruction.
DANGER
If blade jams on any electrical cord or line,
DO NOT TOUCH THE BLADE! IT CAN
BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS.
Continue to hold the grass shear
by the insulated rear handle or lay it down and
away from you in a safe manner.
OGS-1801_25 lgs 30/06/06 9:59 Page 8
