Ryobi OLP18, Original Instructions Manual

Page: 6 / 20

4
worn or damaged components.
● Check if the covers and guards are undamaged
and correctly fitted. Carry out the necessary
maintenance or repairs before using the product.
● Always clean the cutting blades after operation.
● Visually check the condition of the cutting edges
of the cutting blade. Any damaged blade should
be properly repaired or replaced by an authorised
service centre.
● Store the product and make sure that the cutting
mechanism has stopped before setting the product
down.
WHAT’S IN THE BOX
See page 5.
■ Pole lopper attachment x 1
■ Blade cover x 1
■ Operator’s manual x 1
SYMBOLS ON THE PRODUCT
Safety alert
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye protection, hearing protection,
and head protection.
Wear non-slip, heavy duty protective
gloves.
Wear non-slip safety footwear when
using the product.
Beware of overhead power lines. Never
operate the product with the cutting
means closer than 10 m from overhead
power lines.
Do not expose to rain or damp
condition.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15m away from the
operating area.
To prevent serious injury, do not touch
cutting blades.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Parts or accessories sold separately
Note
Warning