manualshive.com logo in svg

Ryobi OCS1830BL, Original Instructions Manual

Share
Download
Ryobi OCS1830BL Original Instructions Manual Download Page 24

24

OPERATION

2

3

1

2

1

1

2

6

5

7

4-5.5 mm

8

5.  Install the new saw chain on the bar. 

Insert the chain drive links into the bar 

groove. Position the saw chain so there 

is a loop at the back of the bar.

The saw chain should face in the 

direction of chain rotation. If the saw 

chain faces backwards, turn the loop 

over.

6.  Hold the saw chain in position on the 

bar, and place the loop around the drive 

sprocket. Lower the bar so that the bolt 

goes through the hole in the attached 

chain tensioner assembly.

NOTE:

 Turn the chain tensioner 

counterclockwise to help align the bolt 

and hole. Turn the chain tensioner 

clockwise to tighten the chain and keep 

the guide bar  in place.

7.  Reinstall the inner chain tensioner and 

sprocket cover. Turn the chain tensioner 

knob clockwise to secure the sprocket 

cover in place.

8. 

Adjust  the  chain  tension  until  the  gap 

between the drive teeth and the bar 

is 4-5.5 mm. Turn the chain tensioner 

adjustment  ring  clockwise  to  increase 

the  tension.  Turn  the  adjustment  ring 

counterclockwise to reduce the tension.

NOTE:

 Frequently check the chain 

tension  while  turning  the  adjustment 

ring.

Summary of Contents for OCS1830BL

































Reviews:

No comments

Brands by name

Popular brands

Load more brands