2
English
This appliance is not intended for use by young children
or infi rm persons unless they have been adequately
supervised by a responsible person to ensure that they
do not play with the appliance.
Keep children and visitors away.
Visitors should
wear safety glasses and be kept a safe distance from
the work area. Do not let visitors contact the tool or
extension cord.
Complies with AS/NZS 60335.
SPECIFICATIONS
Model
LFP1802S
Rating of Blub
18V 0.6A
Weight
0.32 kg
Light Time
(Min)
120 minutes --- 1.4Ah Li-ion
132 minutes --- 1.5Ah Ni-cd
150 minutes --- 1.7Ah Ni-cd
200 minutes --- 2.4Ah Li-ion
Battery Pack
(not included)
BPL-1820
BPL-1815
ABP1801
ABP-1815
Compatible
Charger
(not included)
BCL-1800
BCS618
BCL1418
BCL-1800
BCS618
BCL1418
ACR1800
260022029
ACC1800
OPERATION
TO INSTALL BATTERY PACK (NOT INCLUDED)
Place battery pack in your fl ashlight. Align raised rib on
battery pack with groove inside.
See Figure 1.
Make sure the latches on battery pack snap in place
and battery pack is secured in fl ashlight before
beginning operation.
TO REMOVE BATTERY PACK (NOT INCLUDED)
Switch off your fl ashlight.
Locate latches of battery pack and depress to release
battery pack from your fl ashlight.
Remove battery pack from your fl ashlight.
BATTERY PROTECTION FEATURES
RYOBI 18 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximise
battery life. Under some operating conditions, these
built-in features may cause the battery and the tool it is
powering to act differently from nickel-cadmium batteries.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to
stop running. To reset the battery and tool, release the
trigger and resume normal operation.
NOTE:
To prevent further shut down of the battery, avoid
forcing the tool.
If releasing the trigger does not reset the battery and
tool, the battery pack is depleted. If depleted, the battery
pack will begin charging when placed on the lithium-ion
charger.
ROTATING HEAD OPERATION
See Figure 2.
Your fl ashlight has the feature of rotating the head 180° in
either direction.
BULB REPLACEMENT
TO REPLACE BULB
Remove battery pack from worklight.
See section “To
install/remove battery pack”.
Depress button located on top of lens covers then pull
lens cover to remove.
Remove old bulb from spring by twisting bulb.
Insert new bulb in spring by twisting bulb.
Replace lens cover aligning tabs inside lens cover with
slots on housing and let the bulb aligning to the hole
canter of the refl ector, then snap into place.
Replace battery pack.
Note:
For your convenience, your fl ashlight has a
spare bulb storage area. It is located behind the lens
cover.
See Figure 3.
When purchasing replacement bulb, request to RYOBI
after-sales service for recommended part number
780287001. Always use bulb with same characteristics
and size.
WARNING
Do not attempt to disassemble the battery pack.
Fire or injury may result.
LFP-1802S_SAA-D2_961067036-05.indd 2
LFP-1802S_SAA-D2_961067036-05.indd 2
9/2/2010 12:44:38 PM
9/2/2010 12:44:38 PM