background image

Page 19

MAINTENANCE

WARNING:

When servicing use only identical Ryobi replacement
parts. Use of any other parts can create a hazard or cause
product damage.

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
a clean cloth to remove dirt, oil, grease, etc.

CAUTION:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that may
damage, weaken, or destroy plastics.

DO NOT ABUSE POWER TOOLS.

 Abusive practices can

damage the tool, as well as the workpiece.

WARNING:

Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.

CAUTION:

Any repairs requiring disassembly should only be
performed by a 

Ryobi

 

Authorized Service Center.

 For

the repair center nearest you, call 

1-800-525-2579.

Storing and charging your batteries in temperatures above
100°F or below 50°F will shorten battery life.

Never store batteries in a discharged condition. Wait for
battery to cool and charge immediately.

All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your tool for long periods of time without using it,
recharge the batteries every month or two. This practice
will prolong battery life.

DISPOSAL OF THE EXHAUSTED BATTERY

To preserve natural resources, please
recycle or dispose of properly.

This product contains nickel-cadmium
battery. Must be disposed of properly. Local,
state, or federal laws may prohibit disposal
of Nickel-Cadmium batteries in ordinary
trash.

Consult your local waste authority for information regarding
available recycling and/or disposal options.

For more information on battery recycling call 

1-800-

8BATTERY.

BATTERY PACK PREPARATION FOR RECYCLING

WARNING:

Upon removal, cover the battery pack's terminals with
heavy duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its
components. Also, never touch both terminals with metal
objects and/or body parts, as short circuit can result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.

WARNING:

Do not attempt to disassemble the battery pack. Fire or
injury can result.

BATTERIES

Your drill is equipped with Nickel-Cadmium rechargeable
batteries. Length of service from each charging will depend
on the type of work you are doing.

The batteries in this tool have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out. 

DO NOT

 disassemble battery pack

and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in serious burn.

To obtain the longest possible battery life, we suggest the
following:

Summary of Contents for HP1830M





















Reviews: