background image

3 - English

GENERAL POWER TOOL SAFETY WARNINGS

POWER TOOL USE AND CARE

 

Do not force the power tool. Use the correct power 
tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

 

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

 

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the 
power tool before making any adjustments, changing 
accessories, or storing power tools. 

Such preventive 

safety measures reduce the risk of starting the power tool 
accidentally.

 

Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.

 

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use. 

Many accidents are caused 

by poorly maintained power tools.

 

Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

 

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

 

Keep handles and grasping surfaces dry, clean and 
free from oil and grease. 

Slippery handles and grasping 

surfaces do not allow for safe handling and control of the 
tool in unexpected situations.

BATTERY TOOL USE AND CARE

 

Recharge only with the charger specified by the 
manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

 

Use power tools only with specifically designated 
battery packs. 

Use of any other battery packs may create 

a risk of injury and fire.

 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.

 

Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help. 

Liquid ejected from the 

battery may cause irritation or burns.

 

Do not use a battery pack or tool that is damaged or 
modified. 

Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or risk 
of injury.

 

Do not expose a battery pack or tool to fire or 
excessive temperature. 

Exposure to fire or temperature 

above 265°F may cause explosion.

 

Follow all charging instructions and do not charge the 
battery pack or tool outside the temperature range 
specified in the instructions. 

Charging improperly or at 

temperatures outside the specified range may damage 
the battery and increase the risk of fire.

SERVICE

 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This will 

ensure that the safety of the power tool is maintained.

 

Never service damaged battery packs. 

Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

Summary of Contents for FVM51









































Reviews: