background image

3

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 

impossible to completely eliminate certain residual risk 

factors. The following hazards may arise during use, and 

the operator should pay special attention to avoid the 
following:

 

injury caused by vibration 

 

Hold the product by designated handles and restrict 

working time and exposure.

 

injury caused by exposure to noise

 

Wear hearing protection and limit exposure.

 

injury caused by flying debris

 

Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from hand-held tools 

may contribute to a condition called Raynaud’s Syndrome 

in certain individuals. Symptoms may include tingling, 

numbness and blanching of the fingers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 

cold and dampness, diet, smoking and work practices 

are all thought to contribute to the development of these 

symptoms. There are measures that can be taken by the 

operator to possibly reduce the effects of vibration:

 

Keep your body warm in cold weather. When operating 

the product, wear gloves to keep the hands and wrists 

warm. It is reported that cold weather is a major factor 

contributing to Raynaud’s Syndrome.

 

After each period of operation, exercise to increase 

blood circulation.

 

Take frequent work breaks. Limit the amount of 

exposure per day. 

If you experience any of the symptoms of this condition, 

immediately discontinue use and see your physician.

 WARNING

Injuries may be caused, or aggravated, by prolonged 

use of a tool. When using any tool for prolonged periods, 

ensure you take regular breaks.

WHAT’S IN THE BOX

 

Trimmer attachment x 1

 

Trimmer guard x 1

 

Wrench x 1

 

Manual x 1

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all instructions 

before operating the product, follow all 

warnings and safety instructions.

Wear eye, ear, and head protection.

Wear non-slip safety footwear when 

using the product.

Wear non-slip, heavy-duty gloves.

Beware of thrown or flying objects. 

Keep all bystanders, especially children 

and pets, at least 15 m away from the 

operating area.

Do not expose to rain or damp 

condition.

Do not use metal blade(s) on the 

product.

Keep hands away from blades.

Rotational direction and maximum speed 

of the shaft for the cutting attachment.

114

Guaranteed sound power level (tested in 

RLT254SDSO model)

Waste electrical products should not 

be disposed of with household waste. 

Please recycle where facilities exist. 

Check with your local authority or 

retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately

Note

Warning

The following signal words and meanings are intended to 

explain the levels of risk associated with this product.

 

DANGER

Indicates an imminently hazardous situation, which, if not 

avoided, will result in death or serious injury.

 WARNING

Indicates a potentially hazardous situation, which, if not 

avoided, could result in death or serious injury.

 

CAUTION

Indicates a potentially hazardous situation, which, if not 

avoided, may result in minor or moderate injury.

CAUTION

Summary of Contents for EXPAND-IT ALT05





















Reviews: