Ryobi EXPAND-IT ALT05, Original Instructions Manual

Page: 13 / 20

11
MAINTENANCE
1
2
1
2
20cm 20cm 20cm 20cm
1
2
2.7m
3
REPLACING THE LINE
1.
Rotate the bump knob on the trimmer head
until the line on the centre of the bump knob
aligns with arrows on top of trimmer head.
2. Use a 2.4 mm diameter monofilament string.
Cut one piece of string approximately 5.4 m
in length. Insert one end of the line located
on the side of the trimmer head and push
until line comes out through the eyelet on the
other side. Continue to push string through
the string head until the middle section of the
string is inside the string head.
3.
Ensure there is equal lengths of line on either
side of the trimmer head (max. 2.7 m per
side). Rotate the bump knob on the trimmer
head to wind the line.
NOTE: Wind the line until approximately
20 cm remains protruding from the trimmer
head.