2
English
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
SPECIAL SAFETY RULES
Recommendation for the use of a residual current
device with a rated residual current of 30 mA or less.
WARNING
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the product by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the product.
SPECIFICATIONS
Voltage
220 V - 240 V 50 Hz
No-load speed
30,000 min-
1
Input power
350 W
Max. cutter diameter
6.35 mm
Weight
1.75 kg
APPLICATIONS
You may use the trimming and routing kit for the purposes
listed below:
Routing all types of timber.
Cabinet making, trimming counter tops and finishing
work.
Trimming wood and plastics.
ASSEMBLY
WARNING
Your trimming and routing kit should never be
connected to a power supply when you are assembling
parts, making adjustments, installing or removing
cutters, or when not in use. Disconnecting your trimmer
will prevent accidental starting that could cause serious
injury.
WARNING
Do not use cutters with undersized shanks. Undersized
shanks will not tighten properly and could be thrown
from tool causing injury.
WARNING
Do not use cutters that are larger in diameter than the
opening in trimmer base. Use of such cutters will come
in contact with the trimmer base and damage both
the cutter and trimmer base. Possible loss of control
or create other hazardous conditions that could cause
possible serious personal injury.
INSTALLING/REMOVING CUTTERS
See fi gure 2
WARNING
Failure to unplug your trimmer could result in accidental
starting causing serious injury.
Unplug your trimmer.
Place your trimmer upside down on a workbench in
order to gain easy access to the spindle and collet nut.
Place the small end of one of the wrenches provided on
the spindle flats. This will hold the spindle stationary.
Place the large end of the other wrench provided onto
the collet nut. Rotate wrench counterclockwise to
loosen collet nut.
