ADJUSTING THE LASER GUIDE (FIG. 16)
Adjust the laser angle
Rotate the screw clockwise to turn the laser beam to the
right.
Rotate the screw anti-clockwise to turn the laser
beam to the left.
Adjust the laser position
Rotate the screw anti-clockwise to shift the beam to the
right.
Rotate the screw clockwise to shift the beam to the
left.
MAINTENANCE
After use, check the tool to make sure that it is in top
condition.
We recommended that you take this tool to an
Authorised Ryobi Service Centre for a thorough
cleaning and ubrication at least once a year.
Do not make any adjustments while the motor is
running.
Always disconnect the power cord from the socket
before changing removable or expendable parts
(blade, bit, sandpaper, etc.), lubricating or working on
the saw. Keep handles clean and free from oil and
grease.
If the supply cord is damaged, it shall be replaced by
the manufacturer or its service centre or similar
qualified person in order to avoid a hazard.
WARNING
For greater safety and reliability, all repairs
should be performed by an Authorised Ryobi
Service Centre.
LIVETOOL INDICATOR
TM
This tool features a livetool Indicator
TM
(22) which
illuminates as soon as the tool is connected to the supply.
This warns the user that the tool is connected and will
operate when the switch is pressed.
ENVIRONMENTAL PROTECTION
Do not dispose of in general household
waste. Instead, dispose in an environmentally
friendly way. Contact your local recycling
centre or council for advise. Ryobi takes the
care of the environment very seriously.
6
