- 3 -
RULES FOR SAFE OPERATION
ONLY USE A CUT-OFF WHEEL RATED FOR 4000 RPM
OR GREATER
and manufactured in compliance with
ANSI B7.1. Always store wheels in a dry place with little
temperature variation.
ALWAYS EASE THE ABRASIVE WHEEL AGAINST
THE WORK PIECE
when starting to cut. A harsh impact
can break the wheel.
BEFORE CUTTING,
press the trigger and allow the cut-
off wheel to reach full speed before cutting.
MAKE SURE THE WORK AREA HAS AMPLE LIGHT-
ING
to see the work and that no obstructions will inter-
fere with safe operation
BEFORE
performing any work
using your cut-off machine.
DO NOT OPERATE THIS TOOL WHILE UNDER THE
INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
ALWAYS STAY ALERT!
Do not allow familiarity (gained
from frequent use of your cut-off machine) to cause a
careless mistake.
ALWAYS REMEMBER
that a careless
fraction of a second is sufficient to inflict severe injury.
STAY ALERT AND EXERCISE CONTROL.
Watch what
you are doing and use common sense.
Do not operate
tool when you are tired. Do not rush.
SAVE THESE INSTRUCTIONS.
Refer to them frequently
and use them to instruct other users. If you loan someone
this tool, loan them these instructions also.
WARNING:
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic
particles.
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated timber.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
PRODUCT SPECIFICATIONS
Wheel Type
Reinforced Abrasive Wheels
Wheel Diameter
14 in. (356 mm)
No Load Speed
Rating
Power
Fence Angle
Right
45
°
Left
0
°
Vise Clamp Angle
Right or Left
45
°
Maximum Cutting Capacities:
Round Pipe
110mm outside diameter
3800 min
-1
240 V ~ 50 Hz
2400 W
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such alteration
or modification is misuse and could result in a harzardous
condition leading to possible serious personal injury.
WARNING:
WARNING:
This cut-off machine has been designed for cutting metals,
using reinforced abrasive cut-off wheels only. Do not
remove the wheel, install a steel blade, and attempt to cut
other types of materials such as wood, masonry, etc.
Attempting to cut these other types of materials could
cause an accident resulting in possible serious personal
injury.
Net Weight
24 kg
DESCRIPTION
1. Lower Wheel Guard
2. Abrasive wheel
3. Adjustable Fence
4. Lock Lever
5. Vise Screw
6. Vise Crank Handle
7. Machine base
8. Vise Clamp
9. Stopper Knob
10. Motor
11. Machine Arm
12. Trigger
13. Upper Wheel Guard
14. Power Cord
15. Lock Pin
16. Hex Key
17. Brush Assembly
18. Fence Bolts
19. Rubber Foot
20. Support Bracket
21. Spindle Lock Button
22. Carry Handle
23. Bracket Arm
24. Inner Washer
25. Wheel Arbor
26. Inner Flange
27. Guard Cover Lock
28. Outer Flange
29. Wheel Bolt
30. Outer Washer
31. Fence Scale
32. Scale Indicator
33. Guard Cover
34. Threaded Hole
35. Tension Spring
36. Depth Stop bolt
37. To Lower
38. To Raise
39. “C” Clamp Area
40. Motor Guard
Rectangular
200 x 80mm
Square Stock
105 x 105mm