background image

11

MAINTENANCE

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with  plastic  parts.  Chemicals  can  damage,  weaken  or 
destroy  plastic  which  may  result  in  serious  personal 
injury.

Electric tools used on fiberglass material, wallboard, spackling 
compounds, or plaster are subject to accelerated wear and 
possible premature failure because the fiberglass chips and 
grindings are highly abrasive to bearings, brushes, commuta-
tors, etc. Consequently, we do not recommended using this 
tool for extended work on these types of materials. However, 
if you do work with any of these materials, it is extremely 
important to clean the tool using compressed air.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient 
amount of high grade lubricant for the life of the unit under 
normal operating conditions. Therefore, no further lubrica-
tion is required.

ACCESSORIES

The following recommended accessories are currently available at retail stores:

  4615040  40 Grit Sanding Angles .........................................................................................................................10 pack

  4615060  60 Grit Sanding Angles .........................................................................................................................10 pack

  4615080  80 Grit Sanding Angles .........................................................................................................................10 pack

  4615100  100 Grit Sanding Angles .......................................................................................................................10 pack

  4615150  150 Grit Sanding Angles .......................................................................................................................10 pack

  4615220  220 Grit Sanding Angles .......................................................................................................................10 pack

  4615500  Sanding Angle Assortment ...................................................................................................................10 pack

  4615505  Preparation Pad For Wood .....................................................................................................................5 pack

  4615506  Preparation Pad For Metal ......................................................................................................................5 pack

  4615507   Preparation Pad For Paint .......................................................................................................................5 pack

  4615555   Wax Applicator/Polishing Pad ................................................................................................................5 pack

  4615510   Scraper Assembly

  4615511   Large Triangular Scraper Blade

  4615520   Scraper Foot Only

  4615521   Teardrop Triangular Scraper Blade

  4615522   Small Triangular Scraper Blade

WARNING:

Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or 
accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended 
can result in serious personal injury.

WARNING:

When  servicing,  use  only  identical  replacement  parts. 
Use  of  any  other  parts  may  create  a  hazard  or  cause 
product damage.

WARNING:

Always wear safety goggles or safety glasses with side 
shields  during  power  tool  operation  or  when  blowing 
dust. If operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

Summary of Contents for DS11008













Reviews: