3
English
product in the presence of open flame. An exploded
battery can propel debris and chemicals. If exposed,
flush with water immediately.
■
Do not charge battery tool in a damp or wet
location.
Following this rule will reduce the risk of
electric shock.
■
Do not expose the product to rain.
Water entering
the product will increase the risk of electric shock or
malfunction.
■
For best results, your battery tool should be
charged in a location where the temperature is
more than 50°F but less than 100°F. Do not store
outside or in vehicles.
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush
them with clean water for at least 10 minutes,
then seek immediate medical attention.
Following
this rule will reduce the risk of serious personal injury.
■
Remove battery pack and allow the lens to cool before
performing any maintenance, cleaning or storing.
■
Keep the product dry, clean and free from oil and
grease.
Always use a clean cloth when cleaning.
■
Save these instructions.
Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also to prevent misuse of the product and
possible injury.
SPECIFICATIONS
Model
CXN180G
Bulb
4,300 K; 35 Watt HID Xenon
Life time (bulb)
3,000 hrs
Weight
1.13 kg
Light Output
2,800 Lumens
Compatible
Battery Pack
(not included)
BPL-1820
BPL-1815
ABP1801
ABP1802
ABP-1813
ABP-1815
Compatible
Charger
(not included)
BCL-1800
BCS618
BCL1418
BCL-1800
BCS618
BCL1418
ACR1800
260022029
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium
battery packs.
APPLICATION
Use the product for the purposes listed below:
■
To illuminate any areas requiring additional light
■
To illuminate distant objects
REMOVING WARNING LABEL
The product has an attached warning label on the lens.
Read carefully and remove the label before use.
OPERATION
WARNING
The lens will be very hot during use. To
reduce the risk of burns, do not touch the lens.
To reduce the risk of fire, keep away from
combustible materials while in operation.
WARNING
Do not direct the light beam at persons or
animals and do not stare into the light beam
yourself (not even from a distance). Staring into
the light beam may result in serious injury or
vision loss.
TO INSTALL BATTERY PACK
See Figure 1.
Make sure the switch trigger is in Off position.
Place the battery pack in your spotlight.
Make sure the latches on the battery pack snap in
place and the battery pack is secured in the spotlight
before beginning operation.
TO REMOVE BATTERY PACK
See Figure 1.
Make sure the switch trigger is in Off position.
Locate latches on both sides of the battery pack and
