![background image](http://html1.mh-extra.com/html/ryobi/csb141lz/csb141lz_operators-manual_1506420020.webp)
20
21
����
��
��
POSITIVE 0° BEVEL STOP
See Figure 23.
The saw has a positive 0° bevel stop that has been factory
adjusted to assure 0° angle of the saw blade when making
90° cuts.
TO CHECK POSITIVE 0° BEVEL STOP
n
Unplug the circular saw.
n
Place the saw in an upside down position on a work-
bench.
n
Check the squareness of the saw blade to the base of
the saw using a combination square.
TO ADJUST POSITIVE 0° BEVEL STOP
n
Unplug the circular saw.
n
Loosen bevel adjustment knob.
n
Turn set screw with hex key and adjust base until it is
square with the saw blade.
n
Tighten bevel adjustment knob securely.
WARNING:
Attempting a bevel cut without having the bevel ad-
justment knob securely tightened can result in serious
injury.
Fig. 23
BEVEL ADJUSTMENT
KNOB
COMBINATION
SQUARE
SET SCREW
OPERATION