background image

14

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. 
Use of any other parts may create a hazard or cause 
product damage.

WARNING:

Always wear safety goggles or safety glasses with side 
shields during product operation or when blowing dust. 
If operation is dusty, also wear a dust mask.

WARNING:

To avoid serious personal injury, always remove the
battery pack from the product when cleaning or 
performing any maintenance.

BATTERIES

The battery pack for this product is equipped with nickel-
cadmium rechargeable batteries. Length of service from each 
charging will depend on the type of work you are doing.

The batteries in this product have been designed to provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and attempt to replace the batteries. Handling of these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.

To obtain the longest possible battery life, we suggest the 
following:

J

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery storage longer than 30 days:

J

  Store the battery pack where the temperature is below 

27°C. 

J

  Store battery packs in a “discharged” condition.

J

  Store battery packs disconnected from the tool.

BATTERY PACK REMOVAL AND PREPARATION 
FOR RECYCLING

To preserve natural resources, please recycle or dispose of 
batteries  properly.

This product contains nickel- cadmium batteries. Local, state 
or federal laws may prohibit disposal of nickel- cadmium 
batteries in ordinary trash.

Consult your local waste authority for information  regarding 
available recycling and/or disposal options. 

WARNING: 

Upon removal, cover the battery pack’s terminals 
with heavy-duty adhesive tape. Do not attempt 
t o   d e s t ro y   o r   d i s a s s e m b l e   b a t t e r y   p a c k   o r 
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly. Also, 
never touch both terminals with metal objects and/or 
body parts as short circuit may result. Keep away from 
children. Failure to comply with these warnings could 
result in fi re and/or serious injury.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease etc.

WARNING:

Do not at any time let brake fl uids, petrol, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal 
injury.

Only the parts shown on the parts list are intended to be 
repaired or replaced by the customer. All other parts should 
be replaced at an Authorised Service Centre.

Summary of Contents for CRO1800
















Reviews: