Ryobi CR120L Operator'S Manual Download Page 4

4 – English

GENERAL SAFETy RULES

SPECIFIC SAFETy RULES

 

Recharge  only  with  the  charger  specified  by  the 
manufacturer.  
A  charger  that  is  suitable  for  one  type 
of battery pack may create a risk of fire when used with 
another battery pack.

 

Use  power  tools  only  with  specifically  designated 
battery packs. 
Use of any other battery packs may create 
a risk of injury and fire.

 

When battery pack is not in use, keep it away from 
other metal objects like paper clips, coins, keys, nails, 
screws, or other small metal objects that can make a 
connection from one terminal to another. 
Shorting the 
battery terminals together may cause burns or a fire.

 

Under abusive conditions, liquid may be ejected from 
the  battery,  avoid  contact.  If  contact  accidentally 
occurs,  flush  with  water.  If  liquid  contacts  eyes, 
additionally seek medical help.
 Liquid ejected from the 
battery may cause irritation or burns.

SERVICE

 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 
This will 
ensure that the safety of the power tool is maintained.

WARNING!

To reduce the risk of injury, user must read instruction 
manual.

 

When  servicing  a  power  tool,  use  only  identical 
replacement  parts.  Follow  instructions  in  the 
Maintenance section of this manual.
 Use of unauthorized 
parts or failure to follow Maintenance instructions may 
create a risk of shock or injury.

 

Hold power tool by insulated gripping surfaces when 
performing an operation where the cutting tool may 
contact hidden wiring or its own cord. 
Contact with a 
“live” wire will make exposed metal parts of the tool “live” 
and shock the operator.

 

Use clamps or another practical way to secure and 
support the workpiece to a stable platform.
 Holding 
the work by hand or against your body leaves it unstable 
and may lead to loss of control

 

know  your  power  tool.  Read  operator’s  manual 
carefully.  Learn  its  applications  and  limitations,  as 
well as the specific potential hazards related to this 
power  tool.  
Following  this  rule  will  reduce  the  risk  of 
electric shock, fire, or serious injury.

 

Always wear eye protection marked to comply with 
ANSI  Z87.1.  
Following  this  rule  will  reduce  the  risk  of 
serious personal injury.

 

Protect your lungs. Wear a face or dust mask if the 
operation is dusty. 
Following this rule will reduce the risk 
of serious personal injury.

 

Protect your hearing. Wear hearing protection during 
extended periods of operation.
 Following this rule will 
reduce the risk of serious personal injury.

 

battery  tools  do  not  have  to  be  plugged  into  an 
electrical  outlet;  therefore,  they  are  always  in 
operating  condition.  be  aware  of  possible  hazards 
when not using your battery tool or when changing 
accessories. 
Following this rule will reduce the risk of 
electric shock, fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 
or heat. 
This will reduce the risk of explosion and possibly 
injury.

  

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 
A damaged battery is subject 
to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

batteries  can  explode  in  the  presence  of  a  source 
of ignition, such as a pilot light. 
To reduce the risk of 
serious personal injury, never use any cordless product 
in the presence of open flame. An exploded battery can 
propel debris and chemicals. If exposed, flush with water 
immediately.

 

Do not charge battery tool in a damp or wet location. 
Following this rule will reduce the risk of electric shock.

 

For best results, your battery tool should be charged 
in  a  location  where  the  temperature  is  more  than 
50°F but less than 100°F.  
To reduce the risk of serious 
personal injury, do not store outside or in vehicles.

 

Under  extreme  usage  or  temperature  conditions, 
battery leakage may occur. If liquid comes in contact 
with your skin, wash immediately with soap and water. 
If  liquid  gets  into  your  eyes,  flush  them  with  clean 
water for at least 10 minutes, then seek immediate 
medical attention. 
Following this rule will reduce the risk 
of serious personal injury.

  

Save these instructions. Refer to them frequently and 
use them to instruct others who may use this tool. If you 
loan someone this tool, loan them these instructions also 
to prevent misuse of the product and possible injury.

Summary of Contents for CR120L





























Reviews: