![background image](http://html1.mh-extra.com/html/ryobi/ccc180l/ccc180l_operators-manual_1506164014.webp)
14
OPERATION
CHANGING SANDING SHEETS AND PADS
See Figure 8.
The sander is packed with sanding sheets and scrubbing
pads designed for a variety of uses. To change sheets and
pads, simply pull the used sheet off the base and attach the
desired sheet by pressing the sheet or pad onto the base
of the sander.
ROTATING THE SANDING SHEETS
See Figure 9.
The majority of wear in a precision sanding application
occurs at the tip of the sanding sheet. The unique Tri-Flex
design of the sanding sheets allows you to detach and rotate
the top two thirds of each and extend the life of the sheet.
To rotate the top of the sheet, simply remove the top two
thirds along the perforation. Rotate the sheet so that a
clean corner is located at the tip of the base. Press the
sheet firmly onto the pad.
NOTE:
Scrubbing and polishing pads are not perforated
and cannot be rotated.
Fig. 9
Fig. 8
ROTATING SANDING SHEET
SANDING
SHEET
HOOK-AND-LOOP
PAD
Summary of Contents for CCC180L
Page 16: ...16...