Page 4
OPERATING
NEVER COVER THE AIR VENTS SINCE THEY MUST ALWAYS
BE OPEN FOR PROPER MOTOR COOLING.
1.Hold the tool firmly and place the tip of the bit in the screw head
so that it is perpendicular to the screw head.
2.Apply forward pressure to the tool to the extent that the bit will not
slip off the screw.
3.Squeeze the trigger to start the tool.
MAINTENANCE
After use, check the tool to make sure that it is in top condition.
It is recommended that you take this tool to a RYOBI Authorized
Service Centre for a thorough cleaning and lubrication at least
once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS
IN MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE
RECEPTACLE BEFORE CHANGING REMOVABLE OR
EXPENDABLE PARTS (BLADE, BIT, SANDING PAPER ETC.),
LUBRICATING OR WORKING ON THE UNIT.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING!
To ensure safety and reliability, all repairs should be performed
by an AUTHORIZED SERVICE CENTRE or other QUALIFIED
SERVICE ORGANIZATION.
BATTERY
CHARGER
GREEN LIGHT "ON"
INDICATES FULLY
CHARGED
YELLOW AND GREEN LIGHTS "ON"
INDICATES CONTROL CHARGE OR
POSSIBLE FAULTY BATTERY
RED LIGHT "ON"
INDICATES FAST
CHARGING MODE
Fig. A
BATTERY
PACK
BATTERY
CHARGER
CORDLESS CUTTING TOOLS CAN BE EXTREMELY DANGEROUS
IF NOT HANDLED CORRECTLY AND WITH PROPER CAUTION.
Once the battery pack is attached to the cutting tool, the cutting action
can be activated instantly.
IMPORTANT SAFETY WARNING!!
Failure to follow these safety instructions can
result in accidental starting, causing serious
injury to your self or others.
Use extreme caution when operating the tools.
Never leave the battery pack attached when the tool is not in use.
Never get into the habit of activating the trigger switch when
* *
you do not intend to use the tool immediately.
Always keep out of reach of children and never let
* *
inexperienced user operate the tool without them firstly
thoroughly reading and understanding the safety and
operating instructions in the owners manual.
Never leave the battery pack attached to the tool when
changing blade or making setting adjustments to the tools.
The appliance is not intended for use by young children or
infirm persons without supervision.
Young children should be supervised to ensure that they do
*
not play with the appliance.
