2
English
GENERAL POWER TOOL SAFETY WARNINGS
■
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power tool
for operations different from intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
■
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
n
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
n
This appliance is not intended for use by young
children or infi rm persons unless they have been
adequately supervised by a responsible person to
ensure that they do not play with the appliance.
n
Keep children and visitors away.
Visitors should
wear safety glasses and be kept a safe distance from
work area. Do not let visitors contact tool or extension
cord.
n
Complies with AS/NZS 60335.
SPECIAL SAFETY RULES
■
Use auxiliary handle supplied with the tool.
Loss of
control can cause personal injury.
INSTRUCTIONS FOR SAFE HANDLING
■
Make sure that the tool is only connected to the
voltage marked on the name plate.
■
Never use the tool if its cover or any bolts are missing.
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
■
Always secure tools when working in elevated
positions.
■
Never touch the blade, drill bit, grinding wheel or
other moving parts during use.
■
Never start a tool when its rotating component is in
contact with the work piece.
■
Never lay a tool down before its moving parts have
come to a complete stop.
■
ACCESSORIES :
The use of accessories or
attachments other than those recommended in this
manual might present a hazard.
■
REPLACEMENT PARTS :
When servicing use only
identical replacement parts.
SPECIFICATIONS
Voltage 18
V
Chuck (mm)
2-13
Switch Variable
speed
No load speed (drill mode):
- Lo speed
0 - 450 min-
1
- Hi speed
0 - 1500 min-
1
Clutch 24
Positions
Max. Torque (Nm)
55
Max. Spade Bit (mm)
38
Weight - not incl.battery pack (KG)
1.89
9611067192-01.indd 2
9611067192-01.indd 2
5/29/09 11:25:49 AM
5/29/09 11:25:49 AM
