background image

7

Carefully read and understand these instructions 

before operating this high pressure washer.
Package Contents (Fig.1)

  1. Main unit  

 . Spray handle

 3. Water supply hose 3m 

 . Spray handle hose 1m (Main unit attachment)

 . Variable nozzle lance

 6. Turbo nozzle lance

  7. Water connector (Main unit attachment)

 8. Hose joint

 9. Hose clamp

 10. Nozzle cleaning pin

 11. Oil (100ml)

1. Oil nozzle

 13. Water suction filter 

 1. Transparent hose

 1. Water suction hose with strainer

Technical data

Power rating input

1,00 W

Pressure

 8 MPa

Allowable pressure 

1 MPa

Flow

.0 L / min

Max. inlet water pressure 

0.6 MPa

Max. temperature: 

30℃

Adding water    

From a faucet /

water buckets      

Suction Height

1m

Weight  

17.8 Kg

Sound pressure level

LpA=6dB(A)

Sound power level

LwA=7dB(A)

Vibration Value

aH

.m/s

Name of Parts:

  1. Main unit

 . Spray handle

 3. Water supply hose

 . Spray handle hose

 . Variable nozzle lance

 6. Turbo nozzle lance

  7. Water connector

 8. Hose joint

 9. Hose clamp

 10. Nozzle cleaning pin

 11. Oil

1. Oil nozzle

 13. Water suction filter 

 1. Transparent hose

 1. Water suction hose with strainer

 16. Main switch

 17. Safety lock button

18. Filter

 19. Valve dial

 0. trigger

Self suction kit

 1. Filter

 . Filter cap

 3. Rubber washer

 . Strainer

 . Rubber washer

 6. Filter case

7. Power cord

8. Handle

9. Hose guide

30. Guide cap

31. Hose reel handle

3. Extendable handle

33. Button

3. Oil cap

3. Hose reel cover

36. Fixing pin

37. Hose reel

Preparation

Before starting up your machine, we advise you to carefully 

read through this instruction manual. Follow all instructions 

to minimize the risk of injuries when using the machine.

Prior to operation

Before starting up your machine, please check it carefully 

for any defects. If you find any, do not start up your machine 

and contact your distributor.

Especially check:

The insulation of the electric cable should be faultless 

and without any cracks. If the electric cable is damaged, it 

should be replaced by RYOBI authorized distributor.

Mains power supply connection

The following should be observed when connecting the 

machine to the electric installation:

•  Check before operation that the local power supply is 

the same as the specifications on the rating label.

•  This machine is equipped with universal motor with 

double insulation. It is not necessary to have earth 

connection.  

•  The electric installation shall be made by a certified 

electrician.

•  It is strongly recommended that the power supply to the 

machine should include a residual current device (GFCI).

•  Product protection degree:IPX

General safety regulations and accident prevention

It is essential that you read the safety regulations and 

operating instructions in their entirety and follow the 

information contained therein in order to eliminate the 

possibility of an accident or potentially dangerous situation 

from occurring while working with the machine.

•  The power plug must be plugged into a properly installed 

socket. The power supply should include a residual 

current device for max. 30 mA.

•  Always check the device, the mains cable and the plug 

before using the machine. Only operate the device when 

it is in good working order and has not been damaged in 

any way. Damaged parts must be immediately replaced 

by a qualified electrician.

•  Always pull the power plug out of the socket outlet before 

doing any work on the machine, before changing the 

nozzle and whenever it is not being used.

• 

Warning!

 Unsuitable extension cable can be dangerous.

•  If an extension cable is used, the plug and socket must 

be of watertight construction. 

•  Only  use  suitable  extension  cable  when  working 

outdoors. Extension cable must have a minimum cross-

section of 1. mm

• 

Warning! 

This device was developed to be used with 

cleaning  agents  supplied  or  recommended  by  the 

manufacturer. The use of any other cleaning agents or 

chemicals can negatively affect the safety of the device.

•  Cable  connections  should  be  kept  dry  and  off  the 

ground. Always uncoil the extension cable completely to 

avoid heat damage to the cable.

• 

Warning!

 Do not use the device when other persons or 

animals are in the near vicinity unless they are wearing 

appropriate protective clothing.

Summary of Contents for AJP-2200GQ





















Reviews: