background image

AUGER BITS

LES EMBOUTS DE TARIÈRE 
PUNTAS DE LA BARRENA

AC4DRT/AC6DRT/AC8DRT/AC10DRT 

For use with Ryobi™ P2903 and RY40701 Hole Augers.
NOTE: 

These instructions supplement the 

ASSEMBLING THE HOLE  

AUGER

 instructions in your operator’s manual.

 WARNING:

This insert sheet is not a substitute for reading the operator’s manual. 
To reduce the risk of injury or death, user must read and understand 
operator’s manual before using this product. 

 WARNING:

To prevent accidental starting that could cause serious personal injury, 
always remove the battery pack from the product when assembling parts.

ASSEMBLING THE HOLE AUGER

See Figures 1 - 2

n

  Stand the auger bit (B) upright with tip pointing down. 

Remove the locking pin (A) from the auger (B). 

n

  Install the drive shaft (D) into the auger (B).

Align the holes on the auger (B) and drive shaft (D).

Insert the locking pin (A) and secure with the pin clip (C).

Please consult your operator’s manual for further information or contact 
Ryobi Customer Service at 1-800-525-2579.

998000430
10-28-20 (REV:01)

Fig. 1

Fig. 2

C

A

B

B

C

A

TECHTRONIC INDUSTRIES POWER EQUIPMENT

P.O. Box 1288, Anderson, SC 29622 USA 

n

 1-800-525-2579 

n

 www.ryobitools.com

Model/item number on product may have additional letters at the end. These letters designate 

manufacturing information and should be provided when calling for service.

D

Reviews: