![background image](http://html.mh-extra.com/html/ryobi/990r/990r_operators-manual_1506914004.webp)
4
SAFETY WARNINGS
OPERATIONAL
•
Wear safety glasses/goggles at all times when
operating this trimmer.
•
Dress properly. Do not operate this trimmer when
barefoot or wearing open sandals. Always wear sturdy,
rubber-soled footwear. The use of gloves, ear/hearing
protection and long pants are recommended.
•
Do not wear loose fitting clothing or articles such as
scarves, strings, chains, ties, etc. because they could
get drawn into the air intake. Also make sure long hair
does not get drawn into the air intake.
•
Keep hands, face, and feet away from all moving parts.
Do not attempt to touch or stop the string when it is
rotating.
•
Do not touch the muffler or cylinder. These parts get
extremely hot from operation and remain hot for a short
time after the equipment is turned off.
•
Always hold the trimmer with both hands when
operating. Keep a firm grip on both the front and rear
handles or grips.
•
Operate this trimmer only in a well-ventilated area -out-
doors. Carbon monoxide exhaust fumes can be lethal in
a confined area.
•
If you strike or become entangled with a foreign object,
stop the engine immediately and check for damage.
Repair any damage before further operation is
attempted. Do not operate the trimmer with loose or
damaged parts.
•
Use the right tool. Do not use this trimmer for any job
except that for which it is intended.
•
Do not force the tool at a rate faster than it is able to
cut effectively.
•
Do not overreach. Keep proper footing and balance at
all times.
•
Always remain alert. To prevent injury to yourself and
others, do not operate this trimmer if you are fatigued.
•
Do not operate the engine faster than the speed
necessary to cut, trim or edge. Do not run the engine
at high speed when not cutting.
•
Do not extend the trimming line beyond the length
specified in this manual.
•
Always stop the engine when cutting is delayed or when
walking from one cutting location to another.
•
Use only genuine replacement parts when servicing this
trimmer. These parts are available from your authorized
dealer. The use of non-standard parts, or other
accessories or attachments not designed for this
trimmer, could result in serious injury to the user or
damage to the trimmer.
•
Do not operate the unit while under the influence of
drugs, alcohol, or any medication.
OTHER SAFETY WARNINGS
•
Store the trimmer in an appropriate and dry location to
prevent unauthorized use and damage.
DURING USE
•
Observe the safety warnings on page 3.
•
Always use the shoulder strap when using the brush
blade accessory.
•
Keep the J-handle between the operator and cutting
head at all times.
•
Do not under any conditions cut with the blade located
over 76.2 cm (30 inches) or more above the ground
level.
•
Scything should be done with extreme care and caution.
•
For operation with the standard 4-tooth blade, do not
cut anything thicker than 13 mm (1/2 inch) or a violent
kickback could occur.
•
Do not attempt to touch or stop the blade when it is
rotating.
•
Do not run the unit at high speed when not cutting.
•
If you strike or become entangled with a foreign object,
stop the engine immediately and check for damage.
Have any damage repaired before further operation is
attempted. Do not operate unit with a bent, cracked or
dull blade.
•
Keep the unit clean of vegetation and other materials.
They may become lodged between the blade and guard.
•
Stop the engine IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as
necessary.
AFTER USE
•
Clean blades with a household cleaner to remove any
gum buildup. Then oil the blades with machine oil to
prevent rust.
•
Store the unit in an appropriate area to protect the blade
from unauthorized use or damage.
SAFTEY WARNINGS FOR
THE BRUSH BLADE