background image

1

Safety, performance, and dependability have 

been given top priority in the design of your 

electric high pressure cleaner.

INTENDED USE

The electric high pressure cleaner is only 

intended for use outdoors. For safety reasons 

the product must be adequately controlled by 

using two-handed operation.
The product is designed for home or domestic 

use. It is intended to clean machines, vehicles, 

buildings,  floors,  tools,  facades,  terraces, 

floors, and concrete walkways by removal of 

stubborn dirt using clean water with or without 

cleaning detergent.
The product can be used with turbo nozzle, 

spray nozzle, rotary brush, and surface 

cleaner. The turbo nozzle is used for normal 

cleaning. The rotary brush has a rotating 

feature that effectively cleans cars and allows 

the use of detergent. The spray nozzle is used 

for cleaning surfaces that require spraying or 

with the use of detergent. The surface cleaner 

is used for cleaning and brushing surfaces.
It should be used in well-illuminated conditions.
Do not use the product for any other purpose.

 WARNING

The product is designed for use with a neutral 

cleaning agent supplied or recommended by 

the manufacturer. The use of other cleaning 

agents or chemicals may adversely affect 

the safety of the product.

GENERAL SAFETY WARNINGS

 WARNING

Read all safety warnings and all 

instructions.

 Failure to follow the warnings 

and instructions may result in electric shock, 

fire, and/or serious injury.

 CAUTION

The product must not be used on the drinking 

water  supply  without  a  backflow  preventer 

being installed that corresponds to EN 12729 

Type BA. Water flowing through a backflow 

preventer  is  considered  non-drinkable. 

Always observe the regulations of your local 

water utility company when connecting the 

product to a water supply line.

 

The product is not intended for use by 

children or persons with reduced physical, 

sensory,  or  mental  capabilities,  or  lack 

of  experience  and  knowledge.  Children 

should be adequately supervised to ensure 

they do not play with the product.

 

Wear a complete personal protective 

equipment when operating the product, 

such as boots, safety gloves, safety 

helmets with visor, and hearing protection. 

Use high-impact visors only with liquid 

splash protection.

 WARNING

Do not use the product when people are 

within range, unless they wear protective 

clothing.

 

To reduce the risk of injury, keep children 

and visitors away. All visitors should wear 

safety  glasses  and  be  kept  at  a  safe 

distance from the work area.

 

Inspect the safety devices, such as safety 

valves, flow switches, and pressure 

switches  to  check  if  they  are  in  good 

working  condition.  Make  sure  all  safety 

devices are operating properly before each 

use, such as:

 

On/off switch

 

The 

on/off 

switch 

prevents 

unintentional operation of the 

product.

 

Trigger handle lock

 

The  trigger  handle  lock  locks  the 

trigger and prevents unintentional 

opening of the high-pressure jet.

 

Total stop switch

 

The total stop switch prevents the 

permissible  working  pressure  from 

being exceeded. If the lever on the 

trigger gun is released, the pressure 

Summary of Contents for 4000462550

































Reviews: