Ryobi 3381160, Original Instructions Manual

Page: 4 / 28

2
occurs, flush with water. If liquid contacts eyes, seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
ADDITIONAL SAFETY WARNINGS
■ Some regions have regulations that restrict the use of
the product in some operations. Check with your local
authority for advice.
■ Never direct a water stream toward people or pets, or
any electrical device.
■ Before starting any cleaning operation, close doors and
windows. Clear the area to be cleaned of debris. Toys,
outdoor furniture, or other objects that could create a
hazard.
■ Never pick up or carry the product while the motor is
running.
■ Do not use the product in temperatures below 0°C.
■ Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions in this
product. These products can cause physical injuries to
the operator and irreversible damage to the product.
■ Always operate the product on a level surface.
WARNING
High pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons, animals,
electrical devices, or the product itself.
■ Hold the trigger gun securely with both hands. Expect
the trigger handle to move when the trigger is pulled
due to reaction forces. Failure to do so could cause loss
of control and injury to yourself and others.
■ Exercise caution to avoid slipping or falling.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
■ Use only recommended accessories. The use of
improper accessories may cause risk of injury.
■ Never leave the product running unattended. Turn the
power off. Do not leave the product until it comes to a
complete stop.
■ Be familiar with the controls. Know how to stop the
product and bleed the pressure quickly.
■ Stay alert and exercise control. Watch what you are
doing and use common sense.
■ Do not use a product when you are tired or under the
influence of drugs, alcohol, or medication. A moment
of inattention while operating the product may result in
serious personal injury.
■ Do not use the product if the switch does not turn it on
and off. Any product that cannot be controlled with a
switch is dangerous and must be repaired.
■ Keep a minimum distance of 30 cm when cleaning
vehicles. The high high-pressure jet may damage or
burst vehicle tires and/or tire valves.
USE OF POTABLE WATER SUPPLY
■ The product can use potable water. Use Ryobi suction
hose kit and water bags for the connection.
■ When connecting the product to the water supply,
follow the regulations from the local water supplier.
CAUTION
If you connect the product to a potable water supply, you
must install a backflow prevention device to the water
supply system. The installation should be installed by
professional service personnel and should be accepted
by the local water supplier.
■ Make sure the water in the hose and pump is released
before you turn on the power switch.
WARNING
If there is no water coming out from the nozzle, stop the
product immediately using the power switch. Working
without water may cause serious damage to the pump.
BOOST MODE
■ Boost mode provides extra power. This function is
limited to 8 min of continuous operation. Press the
boost button to switch from normal operation mode to
boost mode.
■ Do not use the boost mode for more than 8 min. The
boost mode automatically returns to normal mode after
8 min.
■ After 8 min of boost mode usage, the pressure washer
will not return to boost mode until 8 min of normal mode
use or rest. The LED in the boost button flashes when
the boost mode is not available for activation.
TOTAL STOP SYSTEM
■ The pressure washer is equipped with a total stop
switch. When you release the trigger of the gun, the
motor stops to save power.
■ The LED in the power switch flashes when the total stop
system is active.
■ The fan runs continuously to cool the product when the
total stop system is activate.
CAUTION
Bring the product to an authorized service centre when
the motor does not stop after you release the trigger of
the gun.