background image

 

 WARNING

Water will condense in the air compressor tank when 

the compressor is in operation. Water left in the tank can 

cause the tank to weaken and corrode, increasing the 

risk of tank rupture.

 

 WARNING

Always disconnect the air hose from tools whenever not 

in use or while servicing. During maintenance, a tool 

connected to air hose may operate accidentally, causing 

serious personal injury!

 

 WARNING

Failure to remove the battery pack from the air 

compressor before storage may result in the compressor 

running continuously, causing overheating, damage to 

the compressor, and possibly a fire.

MAINTENANCE

GENERAL MAINTENANCE

 

Avoid using solvents when cleaning plastic parts. Most 

plastics are susceptible to damage from various types 

of commercial solvents and may be damaged by their 

use. Use clean cloths to remove dirt, dust, oil, grease, 

etc.

 

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 

with plastic parts. Chemicals can damage, weaken or 

destroy plastic which may result in serious personal 

injury.

 

Always release all pressure, remove the battery pack, 

and allow the product to cool to the touch before 

cleaning or making repairs on the product.

 

Do not modify the product in any way or use accessories 

not approved by the manufacturer. Your safety and that 

of others may be compromised.

 

Do not use the product if any switches, guards or 

other functions does not work as intended. Return to 

an authorised service centre for professional repair or 

adjustment.

 

Always make sure the battery pack has been removed 

from the product before making adjustments, lubricating 

or when doing any maintenance on the product.

 

Before and after each use, check the product for 

damage or broken parts. Keep the product in top 

working condition by immediately replacing parts with 

spares approved by the manufacturer.

 WARNING

For greater safety and reliability, all repairs should be 

performed by an authorised service centre.

SYMBOLS ON THE PRODUCT

Safety alert

Please read the instructions carefully 

before starting the machine.

Regulatory Compliance Mark (RCM). 

Product meets applicable regulatory 

requirements.

Always wear goggles when using the 

machine.

Wear ear protectors.

Indoor use

Wet condition alert. Do not expose to rain. 

Store indoors.

Risk of breathing. Air obtained directly 

from the air compressor should never be 

used to supply air for human consumption.
Risk of bursting. Do not adjust regulator 

to result in output pressure greater than 

marked maximum pressure of attachment. 

Do not use at pressure greater than 8.3 

bar.

This compressor may start without 

warning.

Risk of fire or explosion.

 Spray area 

must be well ventilated. Do not smoke 

while spraying or spray where spark or 

flame  is  present.  Keep  compressors  as 

far from the spraying area as possible. 

Keep compressor, at least 10 m from the 

spraying area and all explosive vapours.

Regulated pressure

Tank pressure

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with 

your Local Authority or retailer for recycling 

advice.

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately

6

Summary of Contents for 0209835





















Reviews: