20
Learning to ride
PARKING
Follow these steps to park the Micro-Cycle:
1. Come to a complete stop.
2. Dismount the Micro-Cycle.
3. Press the power button on the right for three seconds to switch from balance mode to standby mode.
4. Nose the bike down and park it on the front parking bar.
5. Turn the key to the left to power off.
6. Be sure and secure your RYNO if parked on a slope of any kind. Use a traditional bike lock to secure it to a bicycle rack or solid
structure if parked on a slope to prevent your Micro-Cycle from rolling down a hill.
TRANSPORTING
The Micro-Cycle is too large to fit in a car, but you can transport it by SUV, van, pickup, or trailer.
NOTE
Lay down a piece of plastic or carpet in the vehicle to protect the Micro-Cycle and the vehicle from damage.
1. With the rear hatch open or tailgate down, roll the Micro-Cycle up to the back bumper and place the Micro-Cycle’s parking bar on the
deck or tailgate of the SUV, van, or pickup. Make sure and place the parking bar on a piece of cardboard so it will slide in on the carpet
2. From behind the Micro-Cycle, lift its frame up and forward. The parking bar will slide forward as the wheel rolls up and over the rear
bumper or tailgate.
3. Slowly and carefully lay the Micro-Cycle on its side so it won’t roll.
