3. Setup
1) Turn Ignition ON
2) Parking lines on mirror will turn ON
3) If AUX video 1 source was connected (turn video source ON then press PWR
button on mirror and the image should appear on screen)
4) Shift vehicle into reverse, the camera image will appear on the screen
5) Shift vehicle out of reverse and the camera image will disappear and go back to
its previous stage
4. Power Button Operation
CAMERA input mode: Adjust brightness of screen
VIDEO 1 input mode: Turns ON and OFF LCD
5. Removable Mount Structure
MV332S is equipped with the removable mounting stem structure,
which allows to exchange with the following available ball joint
mounting stems.
6. Trouble Shooting
Q: The Green LED never turns ON and I do not get a picture?
A: Test to confirm that (+ & -) are connected properly and fuse is good.
Q: The Green LED is ON but I do not see any picture?
A: Make sure that the video RCA’s are connected properly and that the camera is
powered up properly as per camera instructions.
Q: The Green LED is always ON?
A: Follow the “Alternative installation method”
Q: The image on the mirror is opposite (left is right and right is left) what is wrong?
A: The
White
jumper on the camera harness is connected (should be cut in half).
Q: I do NOT like the parking lines, how can I turn them OFF?
A: Connect the
Green
jumper at the camera harness to turn the parking line feature
OFF.
7. Technical Support Contact Info
If you have other questions about the RYDEEN products, please contact your retailer
or Technical Support:
Telephone:
1-877-777-8811 (within USA only)
Email: [email protected]
Web Address: www.rydeenmobile.com
