[User Guide AutoSealer 1001]
[Rx Systems, Inc.]
Page 8
7 Maintenance
The intake vents on both sides of the machine and exhaust fan at the side of the machine
should be checked weekly. If the filters of the 3 side vents are dirty, remove the media
guards to get to the filters. Once removed they can be cleaned with a mild soap and water.
Once they are clean and dry, replace. Replacements can be purchased from Rx Systems.
Monthly, the cover should be removed to check for dirt and dust.
A
S ALWAYS
,
THE COVER
SHOULD NOT BE REMOVED UNTIL THE MACHINE IS COOL
(
ABOUT
.5
HOUR AFTER BEING SHUT OFF
)
AND UNPLUGGED
.
Apply one or two drops of chain saw bar oil (sold by Rx Systems) or
synthetic oil to the hole labeled in the middle of the cross bar.
Check condition of yellow pressure springs (4515).
An air hose or a vacuum cleaner can be used to clean. Always remember to wear the
appropriate eye protection. Care should be taken not to disconnect any of the internal
wiring.
The outside of the AutoSealer can be cleaned with a window cleaner or similar product.
These maintenance suggestions are just that, suggestions. The volume of your work will
dictate how often maintenance should be performed.
