4)
The altitude should not exceed 2000 m. RWD does not guarantee the device can work
normally at places above 2000 m.
5)
Avoid any liquid leaking into the device.
6)
Do not operate the device with damaged components.
7)
Do not operate the device while the bushings, single cell tubes, shields, and cleaning
tanks are removed.
2.4 Electrical safety
To ensure safely, the following regulations need to be followed:
1)
The device must use a matching power supply. If you are not sure of the type of power
supply provided, please consult an authoritative power supplier or local power
company.
2)
Use grounding socket to power this device and ensure the ground wire is connected.
Failed to connect to the ground wire may lead to electric shock.
3)
To reduce the electromagnetic coupling effect between this device and other device in
the laboratory, please use the power cord supplied with this device. Use of any other
type of power cord is prohibited.
4)
Whenever discovered potentially unsafe operation, turn off and unplug the equipment
from the main power supply.
5)
Do not open the enclosure without authorization as this may result in electric shock and
damage the device.
6)
This device is for indoor use only and should not be exposed to rain or wet conditions.
If liquid comes into contact with any part of the device circuit, please immediately turn
off the power and unplug it; dry the wet part of the device promptly.
7)
Ensure that the operating table is dry during the process.
8)
When moving the device from a cold environment to a room temperature environment,
condensed liquid droplets may damage the device. Please wait until the device is
dehumidified before operating.
2.5 Chemical and Biological Safety
1)
Experimenter should strictly comply with laboratory safety precautions, and wear
protective gloves and protective glasses.
2)
When handling hazardous or unknown samples, operate the device in a safety hood for
experimenters ' safety.
3)
Before preparing tissue homogenates or single cell suspensions with organic solvents
or caustic substances, be sure to test them for suitability for device components and
single cell tubes.
4)
When the device components are contaminated, no one other than the experimenter
should have access to the device.
