RVE Merak E750 EVO, Instruction Manual

Page: 20 / 42

-19-
No.
1
2
3
4
5
6
Qty Parts Description
零件名称
尾后皮带轮20T
尾轴
1
1
1
1
No.
Qty
Parts Description
零件名称
Step 5-1
尾皮带轮/尾波箱组装
25MM碳纤尾管
25MM尾撑管夹 1
7
E750尾传皮带
尾波箱轴承座 L
1
尾波箱轴承座 R
1
1
1
2
1
8
9
10
11
12
13
尾波箱支撑柱
尾波箱安装座
内六角顶丝M4x4
内六角顶丝M3x3
内六角顶丝M4x4
2X 尾后皮带轮20T
尾轴
25mm碳纤尾管
25mm尾撑管夹
内六角顶丝 M3x3
尾波箱安装座管夹
4X
杯头内六角螺丝 M3x8
尾波箱安装座
尾波箱轴承座 R
尾波箱轴承座 L
尾波箱支撑柱
尾皮带轮组装件
半圆内六角螺丝 M3x6
E750尾传动皮带
尾波箱安装座管夹的M3x8螺丝，需要先调整主轴与尾轴夹角呈90°时再固定。M3X3内六角顶丝是直接压在碳纤维管上，请勿用力紧固。
组装好尾波箱后，如尾轴左右有间隙，可使用附带的垫片调整。
主旋翼顺时针运转时，从右侧观察尾轴旋转方向应该是逆时针。如旋转方向有误，请调整皮带扭曲方向。
半圆头内六角螺丝M3x6
杯头内六角螺丝M3x8
1
4
5-1 尾皮带轮组装 尾波箱组装
PA
After checked the angle between the main shaft and the tail shaft is adjusted to 90 °. Then tighten the M3x8 screw of the
vertical fin bracket. The M3 set screw is directly pressed on the tail pipe,please do not tighten it firmly.
After assembling the tail gear box, if there is a gap between the left and right tail shaft, you can use the attached shim to adjust.
When the main rotor rotates clockwise, the direction of the tail shaft should be rotates counterclockwise when viewed
from the right side. If the direction is wrong, please adjust the direction of the belt direction.
/ Tail Gear Box assembly
Tail gear box assembly
Tail Drive Pulley
Tail Drive Shaft
Tail Boom
（
25mm
）
Tail Boom Support Bracket
（
25mm
）
Tail Drive Belt
Tail Gear Bearing Case L
Tail Gear Bearing Case R
Tail Housing Spacer
Tail Unit Housing
Set Screw M4x4
Set Screw M3x3
Button Head Socket Screw M3x6
Socket Screw M3x8
Tail Drive Pulley
Tail Drive Shaft
Set Screw M4x4
Set Screw M3x3
Tail Boom Support Bracket
Tail Boom
Tail Unit Housing
Tail Housing Spacer
Tail Drive Belt
Tail Gear Bearing Case L
Tail Gear Bearing Case R
Button Head Socket Screw M3x6
Socket Screw M3x8
14
尾波箱安装座管夹
Tail Gear Holder (25mm)
1
Tail Gear Holder (25mm)