background image

Adjusting the Sensitivity level, Discrimination or access to the Notch function is done 

straight from the detector’s operating mode. The way to access the settings is described below.

After pressing the         button the « Sensitivity » message will appear on the display, 

a number describing the Sensitivity level and a linear scale showing the adjustment range. The 
adjustment is done using the                buttons. Pushing the         button a second time will show
the Discrimination level. Adjusting the Discrimination is done in the same way as adjusting the 
Sensitivity

.

 

Another press of the         button will lead to the Notch function. The Notch point, which 

we want to lock (or unlock) is chosen using the                   buttons. The chosen Notch point is 
locked or unlocked using the              buttons. To quickly block or unblock a larger range of 
points, the user can use the buttons:         or          and        or         simultaneously.

 

After 

pressing the        button the screen returns to the operation mode screen.

Sensitivity in the Argo NE detector may be adjusted across 75 levels. The Sensitivity level

set by the user determines the detector's range and more importantly it's stable operation. In 
areas which are littered, freshly ploughed or have heavy electromagnetic interference, operating
with maximum Sensitivity is not possible. Sensitivity has to be adjusted in accordance to the 
terrain where the search is being conducted and using your own experience. New users should 
begin their searches with the detector set to Sensitivity levels between 40 and 50.

RUTUS

 Argo NE

                                                                                                     

 

8

 

Summary of Contents for Argo NE























Reviews: