Rutland Furlmatic 910-4 Windcharger Installation & Operation
Doc No: SM-138 Iss. D 16.03.15
6
Marlec Eng Co Ltd
Check You Have Received -
See FM910-4 Exploded View
In the event of loss or damage, consult your dealer or the manufacturer.
Exploded View of Rutland FM910-4
1 x Main generator assembly
1 x Tail Fin
6 x aerofoil blades
24 x No. 0x25mm special self-
tapping screws
2 x M10 hex head screws
2 x Tab washers
1 x 2-way terminal block
Tools That You Will Need:
Other Items You Will Need:
Suitable wire stripper
Small terminal screwdriver
Large flat blade screwdriver
Crosshead screwdriver
10mm and 17mm Spanner
Tower/Mounting pole
Batteries
Battery terminals
Cable
Connector blocks (as determined
by your total system)
Other Items You May Have Selected from Marlec:
A Rutland Charge Regulator - visit www.marlec.co.uk for current models
Land Tower and Rigging Kit (Part Nos. CA-12/08 & CA-12/07)
Cable (usually 2.5mm² twin core - Part No: 902-015
)
6 Blades with
24 Screws
Nacelle Dome
Post Adaptor fixes
with 2 bolts and
tab washers
Generator
Hub
Nose Cone
with 3 nylon
Screws
Tail fin fixes
with 2 nuts
and bolts
