IU 675 / 0150
22
TowerFeed
TM
for the HP LaserJet 9000
APPENDIX E - Troubleshooting
Diagnosing an Error Situation (cont.)
When calling for support, please have the printer test pages at hand (Configuration Page, Menu Map and Event
Log Page as per APPENDIX F).
Pos LED Printer Display
TF Beeping Description
Action / Remarks
6
ON 13.11.2x JAM IN
INPUT ACCESSORY
Beep Type 2 TowerFeed Motor blocked
(x = TF tray which fed the
last sheet)
Open TF Tray(s). Remove all sheets from the TF
paper path. Close TF Tray(s).
In case the error stays, call Service.
7
ON 13.11.3x JAM IN
INPUT ACCESSORY
Beep Type 3 Paper jam in TowerFeed
(x = TF tray which fed the
last sheet)
Clear paper jam in TF. Close TF Tray(s).
8
ON 13.11.4x JAM IN
INPUT ACCESSORY
Beep Type 4 TowerFeed tray opened
during feeding cycle
(x = TF tray which fed the
last sheet)
Remove paper from the TF paper path. Close TF
Tray(s).
For TF Beeping Sequences (TF Beep Types) see below.
For other error messages on the printer panel display please refer to your printer manual.
TowerFeed Beep Types
Type 0
TowerFeed Reset Beep (e.g. after Power ON)
(1x short)
Type 1
Paper in TowerFeed paper path after a printer Reset,
(short – short)
or paper-out in TowerFeed tray
Type 2
TowerFeed Motor blocked
(short – long)
Type 3
Paper Jam in TowerFeed
(long – long)
Type 4
(6x short)
Opening a TowerFeed tray during a feed cycle
