manualshive.com logo in svg

RUTHMANN ECOLINE RS200, Use And Maintenance Manual, Page: 67 / 74

Share
Download
RUTHMANN ECOLINE RS200 Use And Maintenance Manual Download Page 67

USE AND MAINTENANCE MANUAL                                                                                                                                R68090150 

ORIGINALE

 

 

RUTHMANN ITALIA S.r.l.  Via Santa Maria del Piano di sotto,91/B 

–

 47854 Montescudo-Monte Colombo (RN) - ITALIA 

pag. 67

 

 

SUBSEQUENT TRANSFERS OF OWNERSHIP 

 
On _________ ownership of the MOBILE ELEVATING WORK PLATFORM forming the object of this manual is 
transferred to ____________________________________________________________________________ 
______________________________________________________________________________We  affirm 
that,  as  of  the  above-mentioned  date,  the  technical,  dimensional  and  functional  characteristics  of  this 
MEWP were in conformance with what was originally required and that any changes have been recorded in 
this register. 
 
                          THE SELLER                                                THE BUYER 
 
 
 
                 ______________________                                 _____________________ 
 
 
 
 

SUBSEQUENT TRANSFERS OF OWNERSHIP 

 
On _________ ownership of the MOBILE ELEVATING WORK PLATFORM forming the object of this manual is 
transferred to ____________________________________________________________________________ 
______________________________________________________________________________We  affirm 
that,  as  of  the  above-mentioned  date,  the  technical,  dimensional  and  functional  characteristics  of  this 
MEWP were in conformance with what was originally required and that any changes have been recorded in 
this register. 
 
                          THE SELLER                                                THE BUYER 
 
 
 
                 ______________________                                 _____________________ 
 
 
 
 
 

SUBSEQUENT TRANSFERS OF OWNERSHIP 

 
On _________ ownership of the MOBILE ELEVATING WORK PLATFORM forming the object of this manual is 
transferred to ____________________________________________________________________________ 
______________________________________________________________________________We  affirm 
that,  as  of  the  above-mentioned  date,  the  technical,  dimensional  and  functional  characteristics  of  this 
MEWP were in conformance with what was originally required and that any changes have been recorded in 
this register. 
 
                          THE SELLER                                                THE BUYER 
 
 
 
                 ______________________                                 _____________________ 
 

Summary of Contents for ECOLINE RS200











































































Reviews:

No comments