3
• High temperature!
Keep electrical cords, drapery, and other furnish-
ings at least 3 feet (0.9m) from the front of the heater and away from
the side and rear.
• Do not run the cord under carpeting. Do not cover cord with throw
rugs, runners, or the like. Arrange cord away from traffic area and
where it will not be tripped over.
• The heater must not be located immediately below a socket outlet.
• To disconnect the fireplace, turn the controls off, then remove the plug
from the outlet.
• Do not insert or allow foreign objects to enter any ventilation or ex-
haust opening as this may cause an electric shock or fire, or damage
to the heater.
• Do not block air intake or exhaust in any manner. Do not use on soft
surfaces, like a bed, where openings may become blocked.
• All electrical heaters have hot and arcing or sparking parts inside.
Do not use in areas where gasoline, paint, or flammable liquids are
used or stored or where the unit will be exposed to flammable vapors.
• Do not modify the electric fireplace. use it only as described in this
manual. Any other use not recommended by the manufacturer may
cause fire, electric shock or injury to persons.
• Avoid the use of an extension cord. Extension cords may overheat and
cause a risk of fire. This heater is not intended for use with an exten-
sion cord. Plug the cord directly into an appropriate wall receptacle.
• Do not burn wood or other materials in the electric fireplace.
• Do not strike the fireplace glass.
• Always use a certified electrician if new circuits or outlets should be
required.
• Always use properly grounded, fused and polarized outlets.
• Disconnect all power supply before performing any cleaning, main-
tenance or relocation of the unit.
WARNING!
If these instructions are not followed, an accident may
lead to serious personal injury or property damage.
Summary of Contents for 90651097
