RUSTA 903502280101, Manual

Page: 4 / 36

4
GET STARTED!
Remove all protective wrappings prior to placing bread slice into toaster.
As there is manufacturing residue or oil remained in the toaster or heat element, usually
it will emit odor for the first use. For the first use it is suggested to operate the toaster
according to below steps without bread. After cooling down completely, you can begin
toasting the first slice of bread.
USE
1. Insert slices of bread into the toaster. You can toast four slices of bread at a time.
NOTE: Make sure that the crumb tray is in place before using the toaster.
2. Connect the toaster to the mains power socket.
3. Turn the dial to the desired setting. There are 6 roasting modes: Position 1 means
lightest roasting and position 6 means darkest. The bread turns golden brown in
the middle position.
NOTE: If you only toast one slice of bread, it will be darker than if you toast
two slices with the same setting. If you toast more than one slices at one time,
the slices will become darker with each roasting.
4. Press the starter lever until it sticks with one click. The CANCEL button lights up
and the appliance starts toasting the bread at once.
NOTE: The starter lever can only be pressed if the toaster is connected
to the power outlet.
5. Once the bread has been toasted to the preset position, it jumps up automatically.
You can also lift the starter lever slightly to make it easier to get hold of the bread.
NOTE: During roasting, you can also observe the colour of the bread.
If you are satisfied, press the CANCEL button. Never stop toasting by
lifting the starter lever.
6. To get a uniform colour, we recommend that you always wait at least 30 seconds
between toasting so that the settings can be reset automatically.