RUSTA 900701270101, Manual

Page: 4 / 20

4
ENG
PRODUCT DESCRIPTION
Speed control dial
Low speed button
High speed button
Motor unit
Detachable stem
Detachable shaft
Blades
TECHNICAL DATA
Voltage 220 –240 V ~, 50/60 Hz
Power 600 W
Dimensions W65 x D65 x H385 mm
USING YOUR BLENDER
• Before using the blender for the first time, clean it according to the instructions under
“Quick cleaning”.
• Do not run the blender without a load for longer than 15 seconds.
CAUTION! The blades are very sharp. Handle with care. Ensure that the immersion
blender is unplugged from the power outlet before assembling or removing
attachments.
INSTRUCTION FOR BLENDER
Do not operate the blender for more than 1 minute at a time. After 2 cycles of operation,
leave the blender to rest for 3 minutes.
1. To assemble the detachable shaft with the motor unit, turn the shaft anti-clockwise
until it is tight. To disassemble, turn clockwise.
2. Plug the blender into a power outlet.
3. Lower the blender into food. Then press and hold the low speed button to start
operating. At the same time, you can select the desired speed setting by turning the
speed control dial. The speed will gradually increase as you turn the speed control dial
from right to left.