RUSTA 308015570101, Manual

Page: 9 / 60

9
MANUALLY VIDEO RECORDING
When Loop recording is turned off you can still manually record videos. Chose the VIDEO
mode with the MODE button. Start and stop recording by pressing the OK button. During
recording you can take pictures also by pressing the UP button.
TAKING PICTURES
To take pictures change to PICTURE mode by pressing the MODE button. Take a picture by
pressing OK button.
VIEW PICTURES / VIDEOS
To view your pictures and videos change to PLAYBACK mode by pressing MODE button.
Use UP and DOWN buttons to move between Picture/Videos. To play or stop a video,
press OK button. When playing video press UP or DOWN button for 3s or more to Rewind
or Forward at different speed (x2, x4, x8).
TROUBLESHOOTING
If troubleshooting occurs under normal operation, please refer to the following solutions.
UNABLE TO TURN ON:
Check whether the recorder is connected to the car charger correctly. If manually oper-
ation to turn on, please check whether the power is low. If keep having trouble, please
press the Reset button to restore to factory settings.
STOPS AUTO RECORDING / NO LOOP RECORDING:
If device stops recording automatically or no loop recording: Please use high-speed TF
card such as C10 card. Due to the huge data of HD videos, the read-write of the card
cannot keep pace.
If no loop recording, it’s possible because the G-Sensor is open and locked the files in the
card. Please check the G-Sensor, unlock and delete unwanted files or format the memory
card to enable new recordings.
WRONG INTERVAL RECORDING TIME:
The intervals or recording time is different from the setting time. Check whether the
motion detection is on, since the recording is long in motion detection mode, it depends
on the object’s movement.
PICTURE/VIDEO QUALITY:
Check if there is dirt or any finger prints on the lens. Clean the lens before recording or
taking photo and keep the lens always clean. The effect of the video files is sometimes
good but sometimes bad. Camera effects have great relationship with the shooting light
conditions, such as black lighting, smooth light, and the strength of the light. All these will
result in different video effects.
If the device crashes, please press the “RESET” button to reset the device to standard
settings.