Russound X5 Controller Streamer Amplifi er Installation Manual
43
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
Specifications
Specification Type*
Specification Text
Shipping Dimensions
13.75” x 13.75” x 4” (350mm x 350mm x 102mm)
Product Dimensions
10.625”x 9.5”x 2.375” (290mm x 240mm x 60mm)
Shipping Weight
8.0lbs. (3.63kg)
Product Weight
7.0lbs. (3.14kg)
Audio Source Inputs
(2) Digital inputs, Coaxial or Optical (TOSLINK)
(1) Bluetooth
(1) Internal Streamer
Communication Ports
(1) Rear- 1 USB 2.0/1.1
(1) Ethernet RJ-45, 10/100 Base T
(1) Keypad RJ-45 T568A standard
(1)
Bluetooth
RJ-45 T568A standard
Frequency Response
20Hz-20kHz +/- 1 dB at 1W output into 8 ohms
Audio File Types
MP3, WAV, AAC, AAC+, Real Audio
Max. Audio Sampling
Rate
192kHz
Fuse Rating
100-120V/T5.0A 250V US and Canada
220-240V/T3.15A 250V Europe
IR Outputs
(1) 1/8” mono jack, tip positive, common
Keypad Outputs
(1) RJ-45 T568A standard
Power Consumption
11W 100-250VAC 50/60Hz
Ethernet
10/100 Base T
Wi-Fi
802.11 b/g
Signal to Noise Ratio
93 dB unweighted, 96 dB A-weighted
Audio Connection(s)
(1) Detachable, 4 pole color coded speaker connector
(1) Subwoofer connection, single RCA jack
(1) L&R line audio output (fixed or variable).
Total Harmonic
Distortion
<0.4%, 50W output into 8 ohms 20Hz-20kHz
Trigger Output(s)
(1) 12VDC 100mA
Watts per channel
50WRMS x 2
• Make sure the power switch is in the On position. The power switch is in the
rear panel of the product.
• Follow the quick guide instruction sheet to initialize the XStream™ X5 in
each room. Refer the LED Diagnostic guide for more information.
• When the controller and the keypads are powered ON all the corresponding
LEDs on the face of the controller will be green. Improper connection may
cause one or more LEDs not to be lit. Check all connections. See LED diagnostic
guide (next) for additional information.
• Cycle power by pressing the power switch, waiting 10 seconds, and then
pressing the power switch again.
• Check connections from the keypads and speakers to the controller.
If the keypad doesn't respond to commands ensure the OS update jumper on
the rear of the keypad is in the RUN position.
