background image

A / V   D I S T R I B U T I O N   &   C O N T R O L   S Y S T E M S

5 Forbes Rd. Newmarket, NH 03857

☎ 

603.659.5170 • Fax 603.659.5388

e-mail: [email protected]

6. Technical Information:

Power Handling: SS-6 70 WRMS / SS-4 100 WRMS.

Frequency Response: +0dB,-0dB 20Hz to 20kHz.

Wire: 16 AWG to 12 AWG wire. 2 or 4 conductor.

Dimensions: SS-6 11.45" wide X 1.80" high X 6.30" deep.

SS-4   8.45" wide X 1.80" high X 6.30" deep.

Weight: SS-6 3.5 lb. / SS-4 2.75 lb.

7. Warranty

The Russound SS-4 and SS-6 are fully guaranteed for Ten (10) years from the date of

purchase against all defects in materials and workmanship. During this period,

Russound will replace any defective parts and correct any defect in workmanship

without charge for either parts or labor. For this warranty to apply, the unit must be

installed and used according to its written instructions. If service is necessary, it must

be performed by Russound. The unit must be returned to Russound at the owner’s

expense and with prior written permission. Accidental damage and shipping damage

are not considered defects under the terms of the warranty. Russound assumes no

responsibility for defects resulting from abuse or servicing performed by an agency or

person not specifically authorized in writing by Russound. Damage to or destruction

of components due to improper use voids the warranty. In these cases, the repair will

be made at the owner’s expense. To return for repairs, the unit must be shipped to

Russound at the owner’s expense, along with a note explaining the nature of the ser-

vice required. Be sure to pack in a corrugated container with at least 3 inches of

resilient material to protect the unit from damage in transit.

For further technical information on this product e-mail us at:  [email protected]

or call us at:  (603) 659-5170 

For information on more of the great products that Russound has to offer, check out

our 

website at

Summary of Contents for SS-4

Page 1: ...I O N C O N T R O L S Y S T E M S SS 4 SS 6 Instruction Manual IMPEDANCE MATCHING 6 PAIR SPEAKER SELECTOR SS 6 1 2 3 4 5 6 1 2 3 4 IMPEDANCE MATCHING 4 PAIR SPEAKER SELECTOR SS 4 Automatic Impedance Matching Speaker Selector ...

Page 2: ...ate up to 12 AWG wire Used with 8 ohm speakers See 4 ohm speaker Note Power handling SS 4 100W RMS Continuous SS 6 70W RMS Continuous Frequency response 0dB 0dB 20Hz to 20kHz Ten year parts and labor warranty 3 Wiring Instructions Wire the A output of your audio amplifier to the amplifier input connection of the SS 4 SS 6 Be sure not to connect any speakers to the B output of your audio amplifier ...

Page 3: ...akers directly or they can be wired to an in wall volume control so that the volume level in each room can be indepen dently adjusted without changing the volume level in the other rooms When the SS 4 or the SS 6 is used in conjunction with Russound volume controls the amplifier should be used as a master volume setting and the room to room vol ume changes are made at each volume control When vary...

Page 4: ...necessary it must be performed by Russound The unit must be returned to Russound at the owner s expense and with prior written permission Accidental damage and shipping damage are not considered defects under the terms of the warranty Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound ...

Reviews: