manualshive.com logo in svg

Russound MCA-C3, User And Installation Manual, Page: 47 / 231

Share
Download
Russound MCA-C3 User And Installation Manual Download Page 47

MCA-C3 Test Procedure 

Page 5 of 77 

Install Russound USB Driver 

 

Note: Install the Russound USB Driver once. 
          This should only be performed if a new IBM PC is used for testing. 

 

1. Obtain the “Russound USB Driver” folder from Russound SQA Department. 
    Copy and extract this folder to your computer. 

    

 

    This file has been modified to include all USB devices used with Russound  
    equipment. This is not the CDM 2.00.00.zip created by FTDI USB products. 

 

2. Plug a USB A-to-B cable from your IBM PC to the USB Port in the front panel  
    of the MCA-C3 Controller. 
3. Turn on the MCA-C3. 
4. If the “Found New Hardware” balloon” displays momentarily go to Step 6. 
    If you do not see the balloon below go to Step 5. 

 

 

 

5. If the “Found New Hardware” balloon does not display, then 
    Check Windows Device Manager for a “USB Serial Port. 
    If a USB Serial Port is listed go to the 

“Install RNET Version Reader”

 section  

    because the USB Driver has already been installed on this computer. 
    The comport (COM4) listed may be different on your computer. This is ok. 

 

 

 

 
 

Summary of Contents for MCA-C3








































































































































































































































Reviews:

No comments